Thingiverse
TurboGrafx-16 A/V cable adapter (Turbo Booster) by PiGood
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a remix of DogP TurboGrafx-16 A/V cable adapter (Turbo Booster).
Designed for TurboGrafx-16 missing the rear cover.
Rebuilt in Fusion 360 with an enclosure for the wiring, added a strain relief clamp, and removed the Molex locking holes as pins would not catch on original.
Required parts,
2 - M3x12 SHCS
4 - 0.1" Molex/Dupont Female Connectors
1 - RCA Cable with the Yellow, Red, and White connector on one end
Required tools
2.5mm Allen Wrench
Molex/Dupont Connector Crimper
Wire Strippers
Hot Glue Recommended
Wiring guides,https://www.gamesx.com/misctech/pcebp.phphttp://www.cgquarterly.com/2010/04/26/building-a-turbografx-16-pc-engine-composite-av-cable/
Yellow - Video
White - Left Audio
Red - Right Audio
Copper - Ground
Designed for TurboGrafx-16 missing the rear cover.
Rebuilt in Fusion 360 with an enclosure for the wiring, added a strain relief clamp, and removed the Molex locking holes as pins would not catch on original.
Required parts,
2 - M3x12 SHCS
4 - 0.1" Molex/Dupont Female Connectors
1 - RCA Cable with the Yellow, Red, and White connector on one end
Required tools
2.5mm Allen Wrench
Molex/Dupont Connector Crimper
Wire Strippers
Hot Glue Recommended
Wiring guides,https://www.gamesx.com/misctech/pcebp.phphttp://www.cgquarterly.com/2010/04/26/building-a-turbografx-16-pc-engine-composite-av-cable/
Yellow - Video
White - Left Audio
Red - Right Audio
Copper - Ground