Tunnelplan 3D printing Robotic Arm AR2/eDO by tunnelplan

Last crawled date: 4 years, 7 months ago

August 14, 2018
Today, the aluminum parts, the bearings and other mechanical parts have arrived by post.
July 27, 2018
Ordered aluminum parts at https://www.anninrobotics.com/
May 20, 2018
All parts have arrived.
Continue with the assembly of the robot arm on the track and the control box.
05 May 2018
Waiting for the last bearing and the last belt.
Adjust the hole in the arm (15 mm) for the transmission and used transarm stiffener.
Used an old 1 inch steel tube with a carbon tube 24 mm inside.
30 April 2018
the printed parts.
25 April 2018
For the track a plate printed.
18 April 2018
Most parts are arrived.
Working on cables and printing parts.
Kickstarter aluminium parts stopped unfortunately, why?
April 2018.
The start of a 3D printing robotic arm.
I will use the AR2 robotic arm (https://www.youtube.com/watch?v=EAcU4k2Qskk) and also the e-DO robotic arm (https://www.youtube.com/watch?v=cDbzeCe0QGs)
Learned a lot from the project (https://www.thingiverse.com/thing:1725519)
Waiting for the ordered parts.