Thingiverse
Tuner Lug Socket Sleeve by pquijal
by Thingiverse
Last crawled date: 4 years, 12 months ago
This is a sleeve for the spline drive socket adapter that is used with tuner lug nuts on aftermarket wheels. It keeps the steel socket from scratching up the lug nut wells on my shiny aluminum wheels.
In retrospect, it seems kind of ridiculous that I'd model this up and print it instead of just putting tape or Plasti Dip on the socket...
Update: I added a version with a base to make it easier to start the print and to give something to grab to pull it over the socket. It is also a proper model that will print with 2 perimeters with a 0.3 mm nozzle. I haven't printed a test yet, so if anyone does, I'd appreciate your feedback.
In retrospect, it seems kind of ridiculous that I'd model this up and print it instead of just putting tape or Plasti Dip on the socket...
Update: I added a version with a base to make it easier to start the print and to give something to grab to pull it over the socket. It is also a proper model that will print with 2 perimeters with a 0.3 mm nozzle. I haven't printed a test yet, so if anyone does, I'd appreciate your feedback.