Thingiverse
Tukey Case
by Thingiverse
Last crawled date: 5 years, 3 months ago
This is a case for the Keebio Tukey, a 1x2 macropad PCB for NovelKeys x Kailh Big Switches.
I initially soldered my Big Switches to my Tukey and propped it up on some standoffs. While bare-bones and not terribly pretty, this worked well for a while. But the switches are plate mount, not PCB mount, and my relatively light use started breaking the solder joints after a few weeks. I decided to re-work this project from the ground up and model a proper case, taking the opportunity to add RGB LEDs in the process.
The bottom plate is optional. Everything holds together fine without it, but it's a nice bit of fit and finish.
I initially soldered my Big Switches to my Tukey and propped it up on some standoffs. While bare-bones and not terribly pretty, this worked well for a while. But the switches are plate mount, not PCB mount, and my relatively light use started breaking the solder joints after a few weeks. I decided to re-work this project from the ground up and model a proper case, taking the opportunity to add RGB LEDs in the process.
The bottom plate is optional. Everything holds together fine without it, but it's a nice bit of fit and finish.