Thingiverse
TTGO T-Beam GPS LoRaWAN Tracker Case/Housing by kurm_de
by Thingiverse
Last crawled date: 4 years, 5 months ago
Build your own GPS LoRaWAN Tracker.
This housing is handy and suitable for the TTGO T-Beam Board (rev0.9 and rev1.0)
Choose a top and a body from the matching parts for your board version.
Depending on the placement of the antenna choose the appropriate cover.
Additionally you can use the clips for mounting.
4pcs M3x16mm screws + nuts are used to mount the housing
body.stl ::: for rev0.9 and rev1.0
body_rev1_0.stl ::: has a power-on sign on side, for the power button of rev1.0
cover.stl ::: simple cover
cover_clip.stl ::: with cut-outs for the clip
cover_antenna_rev1_0.stl ::: with cut-outs for the side antenna (rev1.0 only)
clip_belt.stl ::: to attach to a belt (does not work with the side antenna)
clip_wall.stl ::: for wall mounting
This housing is handy and suitable for the TTGO T-Beam Board (rev0.9 and rev1.0)
Choose a top and a body from the matching parts for your board version.
Depending on the placement of the antenna choose the appropriate cover.
Additionally you can use the clips for mounting.
4pcs M3x16mm screws + nuts are used to mount the housing
body.stl ::: for rev0.9 and rev1.0
body_rev1_0.stl ::: has a power-on sign on side, for the power button of rev1.0
cover.stl ::: simple cover
cover_clip.stl ::: with cut-outs for the clip
cover_antenna_rev1_0.stl ::: with cut-outs for the side antenna (rev1.0 only)
clip_belt.stl ::: to attach to a belt (does not work with the side antenna)
clip_wall.stl ::: for wall mounting