Thingiverse
TS100 Soldering iron box
by Thingiverse
Last crawled date: 5 years, 10 months ago
Remixed the top so that it would be beautiful)))
If you want to print a whole one you will need:
1 top part;
1 bottom part;
2 clamps;
and for the top part, 1 rubber;
2 M3x20 screw for hinges;
and 10 more the magnets 4x2 mm or 4 the magnets 4x5 mm.
I used for printed the PLA and FLEX filament, but also you can use a rubber.
If you want to print a whole one you will need:
1 top part;
1 bottom part;
2 clamps;
and for the top part, 1 rubber;
2 M3x20 screw for hinges;
and 10 more the magnets 4x2 mm or 4 the magnets 4x5 mm.
I used for printed the PLA and FLEX filament, but also you can use a rubber.