TronXY X5S Titan Aero Mount by kyrixa10

Last crawled date: 3 years ago

There were not too many option for the Titan Aero extruder for the TronXY X5S, so I created one. I used the stock extruder motor for the Titan. I used the stock M3 screws that attach the stock extruder to the stock extruder plate, and the stock bushings behind the stock metal extruder plate.
The 6mm spacers go between the rear gantry plate and the wheels. Use the M5x35mm bolts with nuts to fasten the rear plate to the stock extruder plate. There are cutouts in the Titan mounting plate to accommodate the heads of the M5 bolts. The cutouts are 10mm diameter and are 5mm deep.
Print 3 of the 6mm spacers and 2 of the 20mm spacers.