Tronxy x5s Controller Board 120mm Fan Adapter by unnefer

Last crawled date: 3 years, 2 months ago

This is a 120mm fan adapter that I designed primarily for a Tronxy x5s, however it will fit any controller board that uses 100mm x 80mm mounting holes.
I wanted to replace the noisey 40mm fan that came with the Tronxy x5s with something that would be quieter and provide more airflow over the whole board.
With the stock 40mm fan mount, the air from the fan is directed at the center of the controller board, and the extruder driver heatsink in the bottom left corner, the X axis heatsink in the bottom right corner, and the 12v mosfet in the top right corner just don't receive decent aiflow.
This 120mm fan adapter now ensures the whole board is kept cool.
REQUIRED:
4x M4x35mm bolts with M4 nuts to mount the fan
4x M3x45mm bolts and nuts to mount the adapter
4x M4x30mm spacers to space the adapter above the controller board
NOTE:
The adapter has sunken holes for the M3 bolts to sit flush, so the fan can be mounted on a flat surface.
COMPATIBILITY:
It will fit all 3D controller boards that use 100x80mm mounting holes, including:
Tronxy CXY-V.1
Tronxy CXY-V.2
MKS BASE V1.6
MKS BASE V1.5
ANET/FYSETC F5 V1.2
Zonestar ZRIB V5.2