Thingiverse
Tronxy X3S X3 Cable chain system and Hot end Shroud by SummersideGuy
by Thingiverse
Last crawled date: 3 years ago
The X3S hot end is interchangeable with the X3 and X1 Hotends therefore all the shroud mods available online will fit the X3S. The shroud in this series however has a cable chain mount built right in. This shroud requires a 50x15mm blower style fan and one 30mm fan.
To install the shroud first mount your hotend to your back plate, then mount the shroud to the back plate, after you have the shroud in position mockup the blower in place with the blower shroud to get the proper height you need, once you have the proper height tighten down the shroud to the back plate. Now you can install your 30mm fan in the inside of the right side of the shroud.
I have two versions of the filament cooling shroud available. Both should yield similar results
To install the shroud first mount your hotend to your back plate, then mount the shroud to the back plate, after you have the shroud in position mockup the blower in place with the blower shroud to get the proper height you need, once you have the proper height tighten down the shroud to the back plate. Now you can install your 30mm fan in the inside of the right side of the shroud.
I have two versions of the filament cooling shroud available. Both should yield similar results
Similar models
thingiverse
free
Small Blower Fan Mount for v6 E3D Hotend by Steampunq
...e the 30mm fan mount with a small blower fan mount because i have had such bad luck with 30mm fans. this fits the e3d v6 hot end.
thingiverse
free
Shorter 30mm Fan Shroud for Pico Hot End by cfeniak
...shorter 30mm fan shroud for pico hot end by cfeniak
thingiverse
30mm fan shroud for the pico hotend. print in abs.
thingiverse
free
30MM Kossel Mini Hot End Fan Shroud by electronhacks
...t hot ends.
the walls of the shroud are 2 mm thick which keeps it light however be careful with it until you have it installed.
thingiverse
free
Anet A8 X-axis Cable Chain by Schneiderg
... and one of everything else.
note:
make sure to run your wires through the extruder mount before installing the rest of the chain
thingiverse
free
MP Select Mini V2 E3D Dual 30mm Fan Shroud & Mount
...re needed to print the fan shroud. they are hard to remove but pliers and a small flat-head screwdriver will help to remove them.
thingiverse
free
Tronxy X3 Hot_end cover by Saturn_R
...tronxy x3 hot_end cover by saturn_r
thingiverse
hot end cover for tronxy 30mm fan with cable management
thingiverse
free
Tronxy X3 30mm fan shroud with active cooling by SummersideGuy
...by summersideguy
thingiverse
30mm fan shroud for tronxy x3 with 40mm filament cooling mount. print front face down with supports
thingiverse
free
Da Vinci Duo 2.0 Dual E3D conversion no drilling no cutting by NAK3DDesigns
... make sure you run your print bed leveling routine after installation. don't want to see any broken print beds..
good luck..
thingiverse
free
Ubis 13S Blower Fan Shroud by iClint
...ing fins on the hot end.
additionally a small indent has been added to the shrouds main opening to accomodate the larger hot end.
thingiverse
free
Fabrikator Mini Layer Fan Mount - 30mm Blower Fan by 3Dog_Modeling
...el if you install this fan mount and no change to x or y axis travel.
mount using existing bolts and nuts on the hotend carriage.
Summersideguy
thingiverse
free
Baddha Prime by SummersideGuy
...baddha prime by summersideguy
thingiverse
buddha prime..............
thingiverse
free
Buddha Shrek by SummersideGuy
...buddha shrek by summersideguy
thingiverse
buddha shrek, enough said.
thingiverse
free
Decorative Corbel by SummersideGuy
...decorative corbel by summersideguy
thingiverse
a decorative wall hanger i have designed for aesthetics
thingiverse
free
Buddha Predator Masked by SummersideGuy
...buddha predator masked by summersideguy
thingiverse
buddha predator masked,,,
thingiverse
free
Buddha Predator Unmasked by SummersideGuy
...buddha predator unmasked by summersideguy
thingiverse
buddha predator unmasked.....
thingiverse
free
X5S Electronics Shroud by SummersideGuy
...roud to conceal the wiring for the board.
it can be seen in my build video for the printer found herehttps://youtu.be/qlprmjicwvo
thingiverse
free
Shoulder Gun Extension for CW Bruticus by SummersideGuy
... gun extension for cw bruticus by summersideguy
thingiverse
addon extension for the guns that attach on the back of cw bruticus.
thingiverse
free
Triple Fan shroud for JHead by SummersideGuy
...sideguy
thingiverse
modified version of my previous shroud but for the longer jhead hot end with locations for led installation.
thingiverse
free
Mason Jar style Mug by SummersideGuy
...ersideguy
thingiverse
just a simple mason style mug with a ribbed handle and another version done up with some text and graphics
thingiverse
free
SpongeBob Fidget Spinner by SummersideGuy
... nuts for weights which are hidden in inside. simply mirror the stl to get the other side and insert 5/16 nuts and epoxy together
Tronxy
thingiverse
free
LMF8LUU for tronxy x5s
...lmf8luu for tronxy x5s
thingiverse
lmf8luu for tronxy x5s
thingiverse
free
TRONXY XY2PRO by MaiMaiFACTORY
...tronxy xy2pro by maimaifactory
thingiverse
tronxy xy2-pro
sadebox
thingiverse
free
Power_supply_cover for TRONXY by Karollo
...power_supply_cover for tronxy by karollo
thingiverse
power supply cover for tronxy.
thingiverse
free
Tronxy support by d3m1sf
...tronxy support by d3m1sf
thingiverse
soporte para impresora tronxy x3.
thingiverse
free
Tronxy 13mm wrench
...tronxy 13mm wrench
thingiverse
13mm wrench for hotend fitting on tronxy x1...
thingiverse
free
Tronxy x5s by alex190074
...tronxy x5s by alex190074
thingiverse
tronxy x5s cart x fully adjustable only !!
thingiverse
free
Tronxy Logo
...tronxy logo
thingiverse
made this logo
thingiverse
free
Patas TronXY X3 - Vitofeli - TronXY Legs by Todopic
...todopic
thingiverse
patas separadoras para la tronxy x3, permite colocar la caja de control debajo y aprovechas mejor el espacio
thingiverse
free
TRONXY X5S EXTRUDER by ADAM98
...tronxy x5s extruder by adam98
thingiverse
tronxy x5s extruder
thingiverse
free
Belt tensioner Tronxy by jpalianak
...belt tensioner tronxy by jpalianak
thingiverse
belt tensioner tronxy
X3S
turbosquid
$199
Eurocopter X3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Car-x3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Nokia X3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Onkyo X3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Chairs x3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$42
BMW X3 3D Model
...bmw x3 3d model
3dexport
model of bmw x3 materials are for brazil r/s
bmw x3 3d model stihl 1384 3dexport
3d_export
$69
BMW-X3 2022
...vertisements or games corona render and materials all textures include in *.rar files lighting setup is not included in the file!
3d_ocean
$89
BMW X3 2011
...um sports activity vehicle with all-road capability and unparalleled driving dynamics. this first generation bmw x3 became a b...
design_connected
$10
KONTEXTUR X3 Watering Can
...kontextur x3 watering can
designconnected
kontextur x3 watering can computer generated 3d model.
turbosquid
$5
Grenade MH-x3
...yalty free 3d model grenade mh-x3 for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1691211)
X3
turbosquid
$199
Eurocopter X3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Car-x3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Nokia X3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Onkyo X3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Chairs x3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$42
BMW X3 3D Model
...bmw x3 3d model
3dexport
model of bmw x3 materials are for brazil r/s
bmw x3 3d model stihl 1384 3dexport
3d_export
$69
BMW-X3 2022
...vertisements or games corona render and materials all textures include in *.rar files lighting setup is not included in the file!
3d_ocean
$89
BMW X3 2011
...um sports activity vehicle with all-road capability and unparalleled driving dynamics. this first generation bmw x3 became a b...
design_connected
$10
KONTEXTUR X3 Watering Can
...kontextur x3 watering can
designconnected
kontextur x3 watering can computer generated 3d model.
turbosquid
$5
Grenade MH-x3
...yalty free 3d model grenade mh-x3 for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1691211)
Shroud
3d_export
$500
Centrifugal pump volute casing with impeller
...casing with impeller 3dexport volute casing with impeller and shroud ...
3d_export
$35
The Holy Face base relief 3D Model
...the holy face base relief 3d model 3dexport shroud turin veronica veronica's veil gospel ikon jesus holy face...
3d_export
$20
present car cloth presentation transport transportation shape concepts show celebration cover showro
...transportation shape concepts show celebration cover showroom covered revealin shroudd cover covering tarp draped fabric cloth showroom reveal revealing...
3d_export
$5
Lockheed F-117 Nighthawk lowpoly stealth bomber
...initial operating capability status in 1983. the aircraft was shroudd in secrecy until it was revealed to the public...
3d_export
$49
kriss vector gen 2 sub-d
...rear flip sight.<br>- vector ejection port.<br>- vector crb square shroud / 16"" sliencer.<br>- ds150 stock.<br>- .ma (maya 2020 ascii)<br>-...
3d_export
$10
vichy dining table
...in oak, sycamore and walnut marquetry.<br>even if the restaurant shroud the vichy in a long table cloth, two slender...
3d_export
$500
us navy pcu sterett ddg-104 arleigh burke class destroyer flight iia max
...the position has been shifted.<br>q. where are the exhaust shroud for the stacks?<br>a. since ddg-89, the exhaust system was...
thingiverse
free
shroud by samshay317
...shroud by samshay317
thingiverse
shroud
thingiverse
free
Fan Shroud
...fan shroud
thingiverse
this is a fan shroud for a 140mm fan
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
Hot
turbosquid
$1
HOT
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
Hot Tub
...hot tub
3dexport
hot tub - 4k png/tif textures
3d_export
$9
Hot Tub
...hot tub
3dexport
hot tub - 4k png/tif textures
3d_export
free
hot chili
...hot chili
3dexport
hot chili<br>for fruits and getegables collection
3d_export
$5
hot air balloon
...hot air balloon
3dexport
hot air balloon
3d_export
free
Hot dog shop
...hot dog shop
3dexport
hot dog shop
turbosquid
$90
hot venue
...rbosquid
royalty free 3d model hot venue for download as fbx on turbosquid: 3d models for games, architecture, videos. (1336949)
turbosquid
$20
Hot Rod
...
turbosquid
royalty free 3d model hot rod for download as ma on turbosquid: 3d models for games, architecture, videos. (1351690)
turbosquid
$14
Hot Pepper
...bosquid
royalty free 3d model hot pepper for download as obj on turbosquid: 3d models for games, architecture, videos. (1611643)
turbosquid
$1
Hot dog
...turbosquid
royalty free 3d model hot dog for download as max on turbosquid: 3d models for games, architecture, videos. (1450961)
Chain
archibase_planet
free
Chain
...chain
archibase planet
chain chain link chain loop
chain n020708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
chain
...chain
3dexport
3d model chain
3d_export
$5
chain
...chain
3dexport
chain. obj,fbx,blend
archibase_planet
free
Chain
...se planet
chain circuit catena
chain - archicad parametrical gdl 3d model (*.gsm). regulation of the length, curvature and angle.
archibase_planet
free
Chain
...n
archibase planet
chain circuit catena
chain - archicad parametrical gdl 3d model(*.gsm). regulation of the length and angle xyz
3d_ocean
$5
Chain
...chain
3docean
3d models chain design elements
3d models, design elements
3d_ocean
$5
Chain
...chain
3docean
3d models chain design elements
3d models, design elements
turbosquid
$10
Chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1329200)
turbosquid
$9
chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1549461)
turbosquid
$2
Chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1148668)
Cable
3d_export
free
Cables
...cables
3dexport
cables for your purposes
3d_export
free
cable belt for cable organization
...ze your cables in 3d printers. it will bend only to one direction. the area to put the cables per piece is aprox. 1,6cmx2,6cmx1cm
3d_ocean
$16
Ethernet Cable
...ethernet cable
3docean
cable computer electronics ethernet internet network connected
ethernet cable 3d model
3d_export
$65
cable
...cable
3dexport
simple rendering of the scene file
turbosquid
$14
Cable
...l cable for download as ma, max, fbx, 3ds, gltf, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1631358)
3ddd
$1
Cable Cover
...cable cover
3ddd
кабель
vertebra passacavo - cable cover
max + vray 2.20.03
3d_export
$15
Cable reel
...without cable. textures 4k 4096x4096 targa, png, jpeg.<br>number of polygons without cable: 2896<br>with cable: 35328
3d_export
$7
short cable
...short cable
3dexport
rubber cord. very detailed. cable thickness: 2.55 mm total length: 55mm
3d_export
$5
USB CABLE
...usb cable
3dexport
turbosquid
$30
Cable Reels
...osquid
royalty free 3d model cable reels for download as fbx on turbosquid: 3d models for games, architecture, videos. (1439507)
End
archibase_planet
free
Cigarettes end
...d
archibase planet
cigarettes end cigarette stub cigar-butt
cigarette-end - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
end table
...end table
3dexport
end table 3d model dimensions:(w)60cm×(d)60cm×(h)56cm
3d_export
$5
end table
...end table
3dexport
end table 3d model dimensions:(w)60cm×(d)60cm×(h)56cm
turbosquid
$10
End Table
...rbosquid
royalty free 3d model end table for download as max on turbosquid: 3d models for games, architecture, videos. (1570610)
turbosquid
$5
End Table
...urbosquid
royalty free 3d model end table for download as ma on turbosquid: 3d models for games, architecture, videos. (1622809)
turbosquid
$3
End Table
...rbosquid
royalty free 3d model end table for download as fbx on turbosquid: 3d models for games, architecture, videos. (1315115)
3d_export
$5
rope end ring
...rope end ring
3dexport
rope end ring
turbosquid
$2
End Tables
...
royalty free 3d model end tables for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1706896)
turbosquid
$14
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1403051)
turbosquid
$12
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1574707)
System
archibase_planet
free
System
...m
archibase planet
fire alarm system fire alarm box
security light system - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Spider system
...stem spider glass system
spider system to fix glass stefano galli n050912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Euforia System
...euforia system
3ddd
euforia
euforia system
3d_export
$50
Roof system Truss system 3D Model
...oof system truss system 3d model
3dexport
roof system truss truss stage
roof system truss system 3d model aleksbel 38970 3dexport
3ddd
$1
DVD System
...dvd system
3ddd
dvd , schneider
dvd system
design_connected
free
Seating system
...seating system
designconnected
free 3d model of seating system
3d_export
$5
solar system
...solar system
3dexport
solar system in c4d, with 8k nasa textures
3ddd
$1
Quanta System
...quanta system
3ddd
медицина
quanta system.
лазерное оборудование для медицинских центров
3d_export
$15
solar system
...nd the other the sun, the earth and the moon, the latter has an animation with camera movement included, the files are in spanish
3d_export
$14
missile system
...missile system
3dexport