Tronxy X3 Y Vertical Stepper Mount & Belt Holders by gerryh

Last crawled date: 3 years ago

Y axis stepper motor mount to turn the stepper vertical. I converted the bed to linear rails and wanted to eliminate all the original Y axis hardware.
Stepper Motor Mount:
Printed with supports for the mounting tabs
.2mm layer height, 20% infill
Belt Holders do not require support. They need to be mounted on the left side of the bed to keep Y direction correct. 2 holes for each mount need to be drilled into the acrylic plate. Uses the 3x20mm screws included with the printer. Also you'll need about 95cm of belt. If you've trimmed your original belt, it probably won't be long enough.
Will require a new Y stop mount, which can be found here: https://www.thingiverse.com/thing:2345504
I used Kryptonit3's belt tensioner: https://www.thingiverse.com/thing:2221061
And kencam's rod holders: https://www.thingiverse.com/thing:2185364
I've included Fusion360 archive files, if anyone wants to modify the original files.