Thingiverse
Tronxy X3 or X3A Bed Upgrade Remix by Thundrfuk
by Thingiverse
Last crawled date: 3 years, 2 months ago
2018/03/21 Changelog for remix:
Resized bed support to fit the acrylic bed with "X3" on it.
Changed clamps on bed support to use nut and bolts.
Made new endstop and rod holder.
Rod holders only require 1 screw each.
Resized opening for nut to fit easier in the tensioner and made a tiny slice.
Made a spacer for pulley to raise it to the perfect level.
Things needed are:
400X8mm Linear Rods X2
Nema 17 Stepper Motor Steel Bracket
Original M2 Machine Screws and Nuts from Endstop
M3 25mm Machine Screws X4
M3 Nuts X4
M4 28mm Machine Screw + Original Nut, Washers and Bearing for Belt.
M4 8mm Machine Screws X2
M4 16mm Machine Screws X4
M5 10mm Machine Screws X2
M6 18mm Machine Screws X4
M6 Nuts X4
M4 T-Nuts X11
M5 T-Nuts X2
GT2 Belt (6mm)
All parts where printed at 100% Infill accept the Bed_Support which was printed with 25% Infill.
Thanks goes out to the original designers!! :)
Resized bed support to fit the acrylic bed with "X3" on it.
Changed clamps on bed support to use nut and bolts.
Made new endstop and rod holder.
Rod holders only require 1 screw each.
Resized opening for nut to fit easier in the tensioner and made a tiny slice.
Made a spacer for pulley to raise it to the perfect level.
Things needed are:
400X8mm Linear Rods X2
Nema 17 Stepper Motor Steel Bracket
Original M2 Machine Screws and Nuts from Endstop
M3 25mm Machine Screws X4
M3 Nuts X4
M4 28mm Machine Screw + Original Nut, Washers and Bearing for Belt.
M4 8mm Machine Screws X2
M4 16mm Machine Screws X4
M5 10mm Machine Screws X2
M6 18mm Machine Screws X4
M6 Nuts X4
M4 T-Nuts X11
M5 T-Nuts X2
GT2 Belt (6mm)
All parts where printed at 100% Infill accept the Bed_Support which was printed with 25% Infill.
Thanks goes out to the original designers!! :)
Similar models
thingiverse
free
Metric Lead Screws Nuts by 1990ankitjain
...achine linear slider.
use with m4,m5,m6,m8 threaded rod for precision motion.
good alternative to gt2 belt and pulley motion.
thingiverse
free
TRONXY X3 Y Rod Mount (low profile) by jopereira
...uts and one m3 screw with matching nut.
the design already existed, but i made this one from scratch.
credits to original author.
thingiverse
free
Simple nema 17 2020 profile Holder
...er
thingiverse
simple nema 17 2020 profile holder
for assembly you will be need:
m3 10mm screw x4
m4 8mm screw x2
m4 tea nuts x2
thingiverse
free
Rotation to linear redesign by morowlegacy
...ver, this way is much cleaner and easier to find the files.
ps.
sorry for some of the naming of the parts is not my strong point.
thingiverse
free
AM8 Y-Rod Endstop by cmccr88
...g bed thumb screws instead of the wingnuts.
2x m5x10 button head screws
2x m5 square nuts
1x m3x18 screw (from a8)
1x m3 hex nut
thingiverse
free
M4 Nut Trap MPCNC 525 "F-25mm OD" by krasm
...ecause bigger m5 screws(wich fit the original nut trap) didnt fit the tool holder and i had m4 nyloc nuts and bolts laying around
thingiverse
free
10MM T Nut Stone for M4, M5 and M6 by BattleGear
...nd a screw in for a snug fit
print it in abs with 100% infill!
ive used no rafts or support.
the stones have around 2.4 - 2.6 cm3
thingiverse
free
Kossel carriage with implant screw support for belt tension and endstop trigger adjustable by 3DPW
...ll circle on belt, insert the circle to be belt holder. pull belt then the belt will be tighted. use zip tie to tighten the belt.
thingiverse
free
Knobs, based on: M3, M4, M5, M6, M8, M10 nuts and lock-nuts by funbart
...t , after hammering / drive them in the knob.
scale / adjust the inset parameter of kisslicer to fit your specific printer needs.
thingiverse
free
Knob for M3 M4 M5 M6 by mrstanlez
...knob for m3 m4 m5 m6 by mrstanlez
thingiverse
knob for any purpose for a metrics nut m3, m4, m5 and m6.
Thundrfuk
thingiverse
free
Thumbwheel Reminder by Thundrfuk
...always forget which way to turn those bed thumbwheels! this just goes in the corner of the 2020 extrusion as a simple reminder.
thingiverse
free
Tronxy X3 or X3A LCD Brackets for Bed Upgrade by Thundrfuk
...e
i remixed my own lcd brackets to go along with the bed upgrade. they allow for the tensioner to fit just above the lcd panel.
thingiverse
free
Tronxy X3 or X3A Bed Level Knobs by Thundrfuk
...humb-wheels are not that easy to turn so i made these. i would have made them wider but there isn't much clearance available
thingiverse
free
Legs Remix with PSU and Motherboard Support by Thundrfuk
...xy feet are not required. they leave 70mm clearance which may not be enough to fit the original control box under your printer!?
thingiverse
free
Mosfet Box with 30mm Fan Mount by Thundrfuk
...-power-module-board-high-current-210a-mosfet-upgrade-ramps/112433582882?hash=item1a2d905322:g:htqaaoswjqvznofb.
hope you like it!
thingiverse
free
Tronxy X3 or X3A Y-Stabilizer by Thundrfuk
... most "chinese" i guess. so now you can use large heads on this thingi but flipping them around. hope its useful. :)
thingiverse
free
Tronxy X3A or X3 Melzi Case 2.0 Update (2018-02-11) by Thundrfuk
... few changes to make things a little curvy'r and to go along with these thingies: https://www.thingiverse.com/thing:2718310.
thingiverse
free
Tronxy X3A Fan Shroud with 18mm Sensor Mount. by Thundrfuk
...ithout raffosan!
print the fan shroud like it is but supports from build plate only, and no supports for the sensor mount.
thanks
thingiverse
free
Tronxy X3 or X3a Bed upgrade (double remix) and new y - tensioner flipped by fts1999
...has been modified from and big shouts outs to thundrfuk#39;s remix ( thingiverse.com/thing:2714569 ) of and also big shouts...
X3A
thingiverse
free
z-rod stabilizer tronxy x3a by fk462
...z-rod stabilizer tronxy x3a by fk462
thingiverse
simple no bearing z-rod stabilizer for tronxy x3a
thingiverse
free
Tronxy X3A sensor mount by kencam
...an website (3dtoday.ru) and thought it would be a good addition to the tronxy x3 collection.
credit goes to dantes of 3dtoday.ru
thingiverse
free
TronXY X3A Fan Shroud
...d print it without supports. although it printed without them, my ovrerhangs were a little jagged. with supports it printed fine.
thingiverse
free
Tronxy X3A fan shroud with sensor mount by nuH2BuH
...ngiverse
fan shroud with inductive sensor mount for tronxy x3a. it helps your printer to cool down plastic after being extruded.
thingiverse
free
Tronxy X3A Legs by adre76
...e printer.
needed only a little sanding on my printer but your result may vary.
as always, blender was used for the entire design
thingiverse
free
Tronxy X3/X3a Power supply cover by ikishk
...at comes with tronxy x3/x3a (and possibly other) printers.
only requires one m3 screw to secure in place (its a pretty tight fit)
thingiverse
free
Tronxy X3A Legs Honeycombed
...file because it's a 4am hacked together mess, but the honeycomb library is the key so take a look at that if your interested.
thingiverse
free
ik3a alg0t mount for tronxy x3/x3a by ikishk
...ik3a alg0t mount for tronxy x3/x3a by ikishk
thingiverse
secure your printer to your ik3a alg0t.
thingiverse
free
Tronxy X3A better hotend cover
..., simply unbolt the front fan for access to the hotend.
(prints the things in red, follow the alignment on the slicer screenshot)
thingiverse
free
Tronxy X3A simple part cooling by MoayadH
...le air flow.
you can use glue gun to hold the fan tighter to the duct.
the holes are 3mm, make sure you use a good length screws.
X3
thingiverse
free
XViCO X3 and X3S Filament Detection by joshuartaylor
...3 and x3s filament detection
use some ptfe tube inside, should fit snuggly. don't go all the way inside, only up to the edge.
thingiverse
free
UMI X3 Case by Kampoo
...umi x3 case by kampoo
thingiverse
case for umi x3
thingiverse
free
VanMoof X3 Model by William20201122
...m20201122
thingiverse
model of vanmoof x3
if you want to enhance or change:https://www.tinkercad.com/things/03svzwdhuyo-vm-x3-v2
thingiverse
free
FIIO X3 Case by kratter
...fiio x3 case by kratter
thingiverse
fiio x3 hard case.
thingiverse
free
Tronxy X3S Upgrade by prahjister
...work on x3 as wellhttps://www.cnx-software.com/2017/11/14/tronxy-x3s-3d-printer-review-part-3-upgrades-to-fix-bed-leveling-issues
thingiverse
free
Tronxy X3 parts by rideahog2
...tronxy x3 parts by rideahog2
thingiverse
parts i designed for my tronxy x3
thingiverse
free
Support montre finow x3 by Anthony31
...support montre finow x3 by anthony31
thingiverse
support montre finow x3
smartwatch finow x3 stand
thingiverse
free
Azteeg X3 bracket by JamesAFunk
...azteeg x3 bracket by jamesafunk
thingiverse
mounting bracket for an azteeg x3 controller on 20mm t-slot aluminum.
thingiverse
free
Tronxy X3 Endstop bracket by IamTheVector
...tronxy x3 endstop bracket by iamthevector
thingiverse
endstop for tronxy x3
thingiverse
free
Xduoo X3 first case by invisio
...xduoo x3 first case by invisio
thingiverse
xduoo x3 case
Tronxy
thingiverse
free
LMF8LUU for tronxy x5s
...lmf8luu for tronxy x5s
thingiverse
lmf8luu for tronxy x5s
thingiverse
free
TRONXY XY2PRO by MaiMaiFACTORY
...tronxy xy2pro by maimaifactory
thingiverse
tronxy xy2-pro
sadebox
thingiverse
free
Power_supply_cover for TRONXY by Karollo
...power_supply_cover for tronxy by karollo
thingiverse
power supply cover for tronxy.
thingiverse
free
Tronxy support by d3m1sf
...tronxy support by d3m1sf
thingiverse
soporte para impresora tronxy x3.
thingiverse
free
Tronxy 13mm wrench
...tronxy 13mm wrench
thingiverse
13mm wrench for hotend fitting on tronxy x1...
thingiverse
free
Tronxy x5s by alex190074
...tronxy x5s by alex190074
thingiverse
tronxy x5s cart x fully adjustable only !!
thingiverse
free
Tronxy Logo
...tronxy logo
thingiverse
made this logo
thingiverse
free
Patas TronXY X3 - Vitofeli - TronXY Legs by Todopic
...todopic
thingiverse
patas separadoras para la tronxy x3, permite colocar la caja de control debajo y aprovechas mejor el espacio
thingiverse
free
TRONXY X5S EXTRUDER by ADAM98
...tronxy x5s extruder by adam98
thingiverse
tronxy x5s extruder
thingiverse
free
Belt tensioner Tronxy by jpalianak
...belt tensioner tronxy by jpalianak
thingiverse
belt tensioner tronxy
Upgrade
thingiverse
free
upgrade graber
...upgrade graber
thingiverse
upgrade graber
thingiverse
free
Ultimaker Feeder Upgrade, Upgrade :) by yzorg
...deformation.
i made this grooved ring for the new feeder upgrade from ultimaker.
replaces the delrin ring.
test at your own risk.
thingiverse
free
Crosshairs upgrade
...crosshairs upgrade
thingiverse
upgraded wheels, hubcaps and axle joints for a certain transforming robot toy. print 4 of each.
thingiverse
free
Slingfire upgrades by RayvenLover
...slingfire upgrades by rayvenlover
thingiverse
slingfire upgrade.
thingiverse
free
Drawer Upgrade. by AcTiv
...drawer upgrade. by activ
thingiverse
drawer upgrade.
thingiverse
free
RF1000 Upgrade by LHardy
...rf1000 upgrade by lhardy
thingiverse
rf1000 upgrade
thingiverse
free
Tronxy X3 upgrades
...tronxy x3 upgrades
thingiverse
3 axis upgrades
thingiverse
free
Upgrade Anet ET4
...upgrade anet et4
thingiverse
39/5000
upgrade parts for anet printer
thingiverse
free
reel upgrade by gjay21
...reel upgrade by gjay21
thingiverse
upgrade for the fishing rod http://www.thingiverse.com/thing:896767
thingiverse
free
ender 3 upgrade by dog19721972
...ender 3 upgrade by dog19721972
thingiverse
upgrade
Bed
thingiverse
free
bed by
...bed by
thingiverse
pink bed with a white pillow
thingiverse
free
Kossel Plus bed holder for aluminium bed with glass bed
...kossel plus bed holder for aluminium bed with glass bed
thingiverse
pla
thingiverse
free
bed by Syzguru11
...bed by syzguru11
thingiverse
bed
thingiverse
free
bed by callsaul
...bed by callsaul
thingiverse
bed
thingiverse
free
BED by leonk
...bed by leonk
thingiverse
bed
thingiverse
free
Bed by FaserMok
...bed by fasermok
thingiverse
bed
thingiverse
free
Bed by alexdfox
...bed by alexdfox
thingiverse
bed maker
thingiverse
free
bed stanchion
...bed stanchion
thingiverse
top of a bed stanchion
thingiverse
free
bed by bhawkinscds
...bed by bhawkinscds
thingiverse
four post bed
thingiverse
free
bed by EricG
...bed by ericg
thingiverse
bed by eric [created on 3dtin]
Remix
thingiverse
free
Extruder Spinner Remix of Remix of Remix
...d
feel free to print or remix and don't forget to post it.
if you find it useful you can send tip or buy me a coffe. thanks.
thingiverse
free
Predator mask (remix of remix)
...predator mask (remix of remix)
thingiverse
just cool mask :)
thingiverse
free
REMIX by nbvgbbvv
...remix by nbvgbbvv
thingiverse
remix
thingiverse
free
remix by Alejandragr
...remix by alejandragr
thingiverse
remix
thingiverse
free
remixed by mkj
...remixed by mkj
thingiverse
this is remix comment
thingiverse
free
UK Remix of a Remix by ukcat
...for a big kentucky wildcats' fan birthday!
update 3/18/14: uploaded a version with the uk stuff, but no initials at bottom.
thingiverse
free
Remix Mystery
...remix mystery
thingiverse
this is for a class remix assignment.
thingiverse
free
Slight Remix of Tundra Remix by PyrOverkill
...pyroverkill
thingiverse
slight modification of the my remix of the bakflip handle. better resolution on the name plate and logo.
thingiverse
free
Arrowhead Remix
...arrowhead remix
thingiverse
remixing my og arrowhead
thingiverse
free
Remix Project
...remix project
thingiverse
this is my submission for the thingiverse remix project.