Thingiverse
Tricopter Yaw by Outkast65
by Thingiverse
Last crawled date: 3 years, 1 month ago
Tricopter yaw mechanism for DT750 motors. My servo had a slight taper, so I did not add support for full length of the servo. I do not think this will be an issue, as the servo mounting ear fits snug in the base. Slots on the side of the servo, will hopefully keep the zip tie from coming off the end of the servo. Designed for 3/8" booms and to be mounted with zip ties. I used a 4-40 x 1.25" long screw for the hinge pin.
Similar models
thingiverse
free
Tricopter Servo Yaw Tilt Mechanism
...tricopter servo yaw tilt mechanism
thingiverse
re-drill holes on the motor mount.
thingiverse
free
1/2 Inch Tricopter Yaw by FoamyMike
...ng system. i plan on zip tying and hot gluing the servo in place. a servo arm would them be glued to the motor side of the hinge.
thingiverse
free
12mm pipe mount for tricopter by philsson
...luminum mounts on my tri
here is a picture of how i use the aluminum for servo mount for the yaw but are also use for the motors.
thingiverse
free
Tricopter Yaw Mount Motor Base by efether
... the base to make it easier to screw the servo arm to the base. print solid -- 100%. or the servo screw can pull out over time.
thingiverse
free
Tricopter Yaw Mount for 12mm Tube by phreakmonkey
... rod, but other materials will probably work.
designed to fit a 9g hobbyking micro servo. most micro servos will probably fit.
thingiverse
free
Tricopter: center twist style (with solidworks source) by t4obrien
...to mount motors, easy to fly.
i uploaded the solidworks source files too if you need to modify them to fit your servos or beams.
thingiverse
free
dt750 yaw mount by Robert_Jan_Bout
...t direction it should turn smooth.
i used a 3 mm shaft to turn around. drill one time through the holes of one part of the mount.
grabcad
free
X900 Yaw Motor Mount
...x900 yaw motor mount
grabcad
replica of x900 tricopter frame yaw motor mount. stl file included for 3d printing.
grabcad
free
Servo Motor Mount for X900 Tricopter HK
...servo motor mount for x900 tricopter hk
grabcad
servo motor mount for x900 tricopter hk
thingiverse
free
Tricopter Tailservo Support/Plate (15mm arms) by Mindfab
...his tailservo support plate...
the arm width is 15mm - however i have also included the scad, so it can be changed very easily.
Outkast65
thingiverse
free
Tricopter Body Plates by Outkast65
...tricopter body plates by outkast65
thingiverse
based on the rcexplorer tricopter design. these are for 3/8" square booms.
thingiverse
free
HK FPV250 Top Plate by Outkast65
...s spec fpv250 quadcopter. opening to allow access to buttons for kk board. adds real estate to allow fitment of extra hardware...
thingiverse
free
HobbyKing Spec FPV250 Battery Plate by Outkast65
...tween this plate and the frame. that way i can have a flat surface to strap the battery to. screws thru existing holes in fc bay.
Yaw
turbosquid
$25
Real Primitive Axe Bone Yaw-Wood
...3d model real primitive axe bone yaw-wood for download as obj on turbosquid: 3d models for games, architecture, videos. (1589121)
turbosquid
$25
3D Real Primitive Axe Bone Yaw-Wood 3D Model
...model 3d real primitive axe bone yaw-wood for download as obj on turbosquid: 3d models for games, architecture, videos. (1586418)
turbosquid
$25
REALISTIC PRIMITIVE AXE BONE YAW STONE 3D Model
...y free 3d model realistic prehistoric axe for download as obj on turbosquid: 3d models for games, architecture, videos. (1495978)
3dfindit
free
YAWS
...yaws
3dfind.it
catalog: yiheda
3dfindit
free
YAW
...yaw
3dfind.it
catalog: ysc
thingiverse
free
YAWS Anemometer by M0RNW
...yaws anemometer by m0rnw
thingiverse
the anemometer for my yaws (yet another weather station) project.
thingiverse
free
yaw mechanism by ironman
...yaw mechanism by ironman
thingiverse
yaw mechanism fore tricopterhttp://rcexplorer.se/projects/tricopterv25/tricopterv25.html
thingiverse
free
YAWS Photometer by M0RNW
...w
thingiverse
the photometer for my yaws (yet another weather station) project.
the dome should be printer in natural abs or asa
thingiverse
free
YAWS Rain Gauge by M0RNW
...yaws rain gauge by m0rnw
thingiverse
the rain gauge for my yaws project.
uses
thingiverse
free
YAWS Rain Gauge by M0RNW
...yaws rain gauge by m0rnw
thingiverse
the rain gauge for my yaws (yet another weather station) project.
Tricopter
3d_export
$5
Moon copter 3D Model
...model 3dexport spaceship mooncopter tricopter aircraft drone helicopter robot rctricopter moon copter 3d model manu.kvs16051 93671...
3dbaza
$7
Tricopter (346642)
...tricopter (346642)
3dbaza
tricopter 3d model
thingiverse
free
tricopter parts by miketulen123
...tricopter parts by miketulen123
thingiverse
tricopter parts
thingiverse
free
Tricopter by outcastrc
...tricopter by outcastrc
thingiverse
tricopter design
uses 1/2" wood spars, and assorted 3mm hardware.
thingiverse
free
Delta Tricopter by zdar
...delta tricopter by zdar
thingiverse
a delta style tricopter.
thingiverse
free
Tricopter Prototype by brentd
...tricopter prototype by brentd
thingiverse
mini tricopter prototype
thingiverse
free
Tricopter Yaw by 2Mars
...mm rods, suitable as a tail joint.
(based on tricopter rcexplorer.se http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/)
thingiverse
free
tricopter base by gpatel522
...tricopter base by gpatel522
thingiverse
tricopter base for anyone to use. no commercial use.
thingiverse
free
Tricopter V2.5 by Crazyinventor
...tricopter v2.5 by crazyinventor
thingiverse
these are the printed parts that go to my tricopter v2.5.
thingiverse
free
Tricopter Hook by Lowfiero
...tricopter hook by lowfiero
thingiverse
just a quick wall hook for my batbone tricopter.