Thingiverse

Tricopter tail pivot by Kezat

Tricopter tail pivot by Kezat

by Thingiverse

Get from Thingiverse

Last crawled date: 3 years ago

V2 is out! http://www.thingiverse.com/thing:350802
Tail pivot system with built in landing gear for a Tricopter. Mounts to a 13mm wood boom.
Made for and Inspired by the Batbone from Flitetest.com. This is a functioning prototype. Open to suggestions or changes.
Changes:
Added photo of how the servo is mounted.
Included hole jig for the lexan sheet
Added holes for the ziptie behind the motor.
Reinforced top pivot.
2-22-14 :
Extended servo rod mount to better line up servo rod hinge point with main hinge. Also widened rod mount to allow more clearance from rod to boom.

Tags

tricopter kezat pivot tail

Similar models

Servo hinge for tricopter by frag4lot

Servo hinge for tricopter by frag4lot

...inge for tricopter by frag4lot thingiverse servo hinge to mount on a 12mm boom, set to the right height for a corona 939mg servo

12m Tail Boom Servo Mount by fischerko

12m Tail Boom Servo Mount by fischerko

...nt by fischerko thingiverse this is a tail boom servo mount for 12mm od boom/rod. you'll need 2 of these to mount one servo.

Tricopter Motor Pivot by Gundy21

Tricopter Motor Pivot by Gundy21

...tricopter motor pivot by gundy21 thingiverse basic tricopter tail boom motor pivot for flitetest tricopter build

Tricopter tail mechanism for 20mm CF Tube tail boom by FPV_Pilot

Tricopter tail mechanism for 20mm CF Tube tail boom by FPV_Pilot

...banggood.com/wholesale-warehouse-jx-pdi-2506mg-25g-metal-gear-micro-digital-servo-for-rc-models-wp-usa-1075297.html?rmmds=myorder

Tricopter tail motor mount

Tricopter tail motor mount

...tricopter tail motor mount grabcad this mount mates with the tail servo mount assembly.

multirotor motor mount with landing gear by Kezat

multirotor motor mount with landing gear by Kezat

...pter tail pivot and the batbone from flitetest.com (with center cross-brace removed) changes: went from 2 to 1 hole in the boom

Tail Servo Mount

Tail Servo Mount

...tail servo mount grabcad a means of connecting the tail rotor servo and the boom as well as the tail motor mount.

Tricopter / Quadcopter Motor mounts

Tricopter / Quadcopter Motor mounts

...opter or quadcopter, this design matches the tricopter tail mount. again, 18x12 boom arms (dont like the flex of 12x12 or 10x10)

Tricopter Yaw by Outkast65

Tricopter Yaw by Outkast65

...the servo. designed for 3/8" booms and to be mounted with zip ties. i used a 4-40 x 1.25" long screw for the hinge pin.

Tricopter Motor Tilt

Tricopter Motor Tilt

...tricopter motor tilt grabcad motortilt for a tricopter with wooden booms and a cheap 9g micro-servo

Search for 909423 Similar models

Kezat

Flask container by Kezat

Flask container by Kezat

...thingiverse simple container for your small storage needs. not really intended for liquids but perhaps it could be made to work?

Craftbot hex key holder by Kezat

Craftbot hex key holder by Kezat

.... t handles. http://www.thingiverse.com/thing:951909 check out my other designs here:http://www.thingiverse.com/kezat/designs

Oddball file share. by Kezat

Oddball file share. by Kezat

...re. by kezat thingiverse this is just a place for me to share small files on forums that do not deserve a individual thing page.

Ring tower - pen container. by Kezat

Ring tower - pen container. by Kezat

...ring tower - pen container. by kezat thingiverse printed with no support but depending on your printer it may help.

Part Tub by Kezat

Part Tub by Kezat

...ng lost during repair/maintenance, while still allowing single components to be removed without dumping out the entire container.

T handle by Kezat

T handle by Kezat

... updated stems, increased thread tolerance by 0.125mm. check out my other designs here:http://www.thingiverse.com/kezat/designs

Spool holder lock-Raise3D by Kezat

Spool holder lock-Raise3D by Kezat

...spool holder lock-raise3d by kezat thingiverse this should stop the spool holder from falling off during a spool change.

Storage tube by Kezat

Storage tube by Kezat

...ing) thin wall 0.8mm thick for a standard 0.4 extrusion width. thick wall 1.44mm thick for a 0.72 extrusion width or with infill.

Salt Shaker by Kezat

Salt Shaker by Kezat

...mm tall. printed on a qu-bd oneup pla plastic .200 layer height 205c 20mm/s total print time ~135min (cooling slowdown enabled)

Simple Scoop by Kezat

Simple Scoop by Kezat

... reaching in thin necked jars. ~10min print time at 120mm/s 200 micron changes: added a longer handle version from 40mm to 85mm

Search for 62 Kezat models

Tricopter

Moon copter 3D Model

Moon copter 3D Model

...model 3dexport spaceship mooncopter tricopter aircraft drone helicopter robot rctricopter moon copter 3d model manu.kvs16051 93671...

Tricopter (346642)

Tricopter (346642)

...tricopter (346642) 3dbaza tricopter 3d model

tricopter parts by miketulen123

tricopter parts by miketulen123

...tricopter parts by miketulen123 thingiverse tricopter parts

Tricopter by outcastrc

Tricopter by outcastrc

...tricopter by outcastrc thingiverse tricopter design uses 1/2" wood spars, and assorted 3mm hardware.

Delta Tricopter by zdar

Delta Tricopter by zdar

...delta tricopter by zdar thingiverse a delta style tricopter.

Tricopter Prototype by brentd

Tricopter Prototype by brentd

...tricopter prototype by brentd thingiverse mini tricopter prototype

Tricopter Yaw by 2Mars

Tricopter Yaw by 2Mars

...mm rods, suitable as a tail joint. (based on tricopter rcexplorer.se http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/)

tricopter base by gpatel522

tricopter base by gpatel522

...tricopter base by gpatel522 thingiverse tricopter base for anyone to use. no commercial use.

Tricopter V2.5 by Crazyinventor

Tricopter V2.5 by Crazyinventor

...tricopter v2.5 by crazyinventor thingiverse these are the printed parts that go to my tricopter v2.5.

Tricopter Hook by Lowfiero

Tricopter Hook by Lowfiero

...tricopter hook by lowfiero thingiverse just a quick wall hook for my batbone tricopter.

Search for 531 Tricopter models

Tail

donkey tail burro tail succulent creeper

donkey tail burro tail succulent creeper

...donkey tail burro tail succulent creeper 3dexport donkey tail | burro tail succulent creeper .

The tail of a fish

The tail of a fish

...the tail of a fish 3dexport the tail of a fish

Machine tail

...machine tail 3dexport machine tail

Mechanical tail

Mechanical tail

...mechanical tail 3dexport mechanical tail<br>four-part movement

The tail of a fish

The tail of a fish

...the tail of a fish 3dexport waist movement

Bizarre tail

...bizarre tail 3dexport four-part movement

Armchair Tail

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Wolf Tail

...model wolf tail for download as 3ds, obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1238663)

Red Tail

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Jig Tail

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Search for 10026 Tail models

Pivot

design_connected

Pivot

...pivot designconnected ligne roset pivot computer generated 3d model. designed by lutz, anne .

Pivot

... , dornbracht спасибо авторам моделей ,использованных для привью. в архиве кран и вода.

MILLDUE / Pivot

MILLDUE / Pivot

...milldue / pivot 3ddd milldue фабрика milldue, коллекция pivot, композиция pv_16

design_connected

Direction Pivotant

Direction Pivotant

...direction pivotant designconnected vitra direction pivotant computer generated 3d model. designed by prouvé, jean.

Pivot Beam

...bosquid royalty free 3d model pivot beam for download as max on turbosquid: 3d models for games, architecture, videos. (1414902)

3dsMax Pivot Reset

3dsMax Pivot Reset

...ivot position reset rotation you can adjust the position and orientation of an object’s pivot point at any time using this tools.

Стул Pivot low back

Стул Pivot low back

...стул pivot low back 3ddd pivot , tom dixon pivot low back

PIVOT CHANDELIER

PIVOT CHANDELIER

...pivot chandelier 3ddd brendan ravenhill manufacturer: brendan ravenhill, usa www.brendanravenhill.com

pivotal 51799-bl

pivotal 51799-bl

...d royalty free 3d model pivotal 51799-bl for download as max on turbosquid: 3d models for games, architecture, videos. (1400644)

Vitrocsa Pivoting Door

Vitrocsa Pivoting Door

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Search for 10796 Pivot models