Thingiverse
Trickler overhang stand with counterweight compartment by waffenmeister
by Thingiverse
Last crawled date: 4 years, 6 months ago
Trickler stand that overhangs 20mm over the scale.
With two compartments for the additional counterweights
Counterweights are not required, it works as is.
Bonus: some holes that can accept 9mm or narrower cartridges.
Overhang low point height from the surface is 37mm.
Can be printed with any layer height and nozzle
No plastic type restrictions
This design is a hobby, sport and recreational tool. It may not be replicated for the commercial sales. Use in military applications or in commercial cartridge renewal\reload is strictly prohibited.
With two compartments for the additional counterweights
Counterweights are not required, it works as is.
Bonus: some holes that can accept 9mm or narrower cartridges.
Overhang low point height from the surface is 37mm.
Can be printed with any layer height and nozzle
No plastic type restrictions
This design is a hobby, sport and recreational tool. It may not be replicated for the commercial sales. Use in military applications or in commercial cartridge renewal\reload is strictly prohibited.