Thingiverse
Trey SD Card Holder by RamblinDan
by Thingiverse
Last crawled date: 5 years, 1 month ago
There are a lot of folks who have designed SD memory card holders. This is YAO (Yet Another One).
A bit different as I decided to add some art to the basic holder design. There is a simple plain one, that is a very small file size. Version two (V2) is a huge file as there is a LOT of detail in the relief carving. No Low_poly here. SO the fancy one may not be for everyone. Version 3 is reduced 70% but may have some artifacts. I haven't printed this version.
The non-graphic version can be printed any layer height you desire. I used 10% infill and wood PLA so it is very light weight and fast printing. Layer height was 0.20MM.
The fancy versions require a bit more work to print. I used two Layer heights but one could work. I chose 0.20MM for the base up to the tower section and switched to 0.10MM for the detail in the high relief carving on the tower. The whole thing could be printed at one height. Experiment with what your printer can handle.
A bit different as I decided to add some art to the basic holder design. There is a simple plain one, that is a very small file size. Version two (V2) is a huge file as there is a LOT of detail in the relief carving. No Low_poly here. SO the fancy one may not be for everyone. Version 3 is reduced 70% but may have some artifacts. I haven't printed this version.
The non-graphic version can be printed any layer height you desire. I used 10% infill and wood PLA so it is very light weight and fast printing. Layer height was 0.20MM.
The fancy versions require a bit more work to print. I used two Layer heights but one could work. I chose 0.20MM for the base up to the tower section and switched to 0.10MM for the detail in the high relief carving on the tower. The whole thing could be printed at one height. Experiment with what your printer can handle.