Thingiverse
Tray for 25 x microscope slides by LittleFrog
by Thingiverse
Last crawled date: 4 years, 1 month ago
Tray to help to clean, dry and store slides for microscopy.
Designed for 25 slides between 75 and 76 mm of length, 1 to 1.2 mm in thickness.
I added 2.5 mm holes in the corners for M3 taping or to be enlarged to 3 mm... Just in case.
On the picture I tested my print using:
Marienfelf 76 x 26 x 1.0 mm slides
Bresser 75.5 x 25 x 1.0 mm slides
(no name) single concave 76.2 x 25.5 x 1.2 mm slides
(no name) double concave 75.9 x 25.6 x 1.1 mm slides
(no name) 76.2 x 24.8 x 1.0 mm slides (the cheapest existing slides => don't buy that!)
For cleaning, 2 trays can be used together (see 2nd picture), but not mandatory.
Reminder: thermoplastics are not autoclavable!
Use temperate water (<50°C for PLA) for washing.
See also my coverslips trays here: https://www.thingiverse.com/thing:4892618
Designed for 25 slides between 75 and 76 mm of length, 1 to 1.2 mm in thickness.
I added 2.5 mm holes in the corners for M3 taping or to be enlarged to 3 mm... Just in case.
On the picture I tested my print using:
Marienfelf 76 x 26 x 1.0 mm slides
Bresser 75.5 x 25 x 1.0 mm slides
(no name) single concave 76.2 x 25.5 x 1.2 mm slides
(no name) double concave 75.9 x 25.6 x 1.1 mm slides
(no name) 76.2 x 24.8 x 1.0 mm slides (the cheapest existing slides => don't buy that!)
For cleaning, 2 trays can be used together (see 2nd picture), but not mandatory.
Reminder: thermoplastics are not autoclavable!
Use temperate water (<50°C for PLA) for washing.
See also my coverslips trays here: https://www.thingiverse.com/thing:4892618