Thingiverse
Trash Compactor by samroe3d
by Thingiverse
Last crawled date: 4 years, 5 months ago
Star wars diorama for 1:12 scale figures (or any figures!, scale to 62.5% for 3.75" figures!)
This print has several options based on preference. A back wall that is connected, and one that has a separated door if you find it easier to print. The side wall is also included as a single piece, or split into two pieces if you, like me, can't fit it on your print bed. You will need to mirror the wall to print the opposite wall. You should be move the walls (not smoothly without some sanding) to have different amounts of crushy crushy. There is no floor or ceiling in this print. I recommend failed 3d Prints to create junk to layer the bottom!
This print has several options based on preference. A back wall that is connected, and one that has a separated door if you find it easier to print. The side wall is also included as a single piece, or split into two pieces if you, like me, can't fit it on your print bed. You will need to mirror the wall to print the opposite wall. You should be move the walls (not smoothly without some sanding) to have different amounts of crushy crushy. There is no floor or ceiling in this print. I recommend failed 3d Prints to create junk to layer the bottom!