Thingiverse
Trailer Bike Hitch for Weber Coupling by cariocadagema
by Thingiverse
Last crawled date: 4 years, 7 months ago
Drawbar adapter for the Weber hitch. I have made three different versions for tubes of 22.2mm, 27.9mm and 30mm.
A metal cotter pin to secure it must also be made yourself. Alternatively, you can simply push through a long screw M5 and secure with a wing nut.
In nylon or ABS printed the clutch will also be able to take higher loads.
An additional retaining strap can be fixed under the nut if necessary.
A metal cotter pin to secure it must also be made yourself. Alternatively, you can simply push through a long screw M5 and secure with a wing nut.
In nylon or ABS printed the clutch will also be able to take higher loads.
An additional retaining strap can be fixed under the nut if necessary.