Thingiverse
Tradfri Multi-Adapter by magic_hufi
by Thingiverse
Last crawled date: 4 years, 7 months ago
This set of items will enable the small (dimmer) switches of the IKEA Tradfi line to be mounted in frames from several manufacturers, at the moment:
Gira System 55 line
Busch-Jäger ReflexSi line
Other lines may work as well and specific brackets will be added over time.
The base plate has mounting holes for standard flush mount boxes (60mm) in both directions (horizontal and vertical), but can also be glued or taped on any flat surface.
Primary design objectives were:
simple conversion of the switch: Just the backplate needs to be changed
the entire setup is as flat as possibble to integrate nicely with other equipment like outlets, ports, etc
Gira System 55 line
Busch-Jäger ReflexSi line
Other lines may work as well and specific brackets will be added over time.
The base plate has mounting holes for standard flush mount boxes (60mm) in both directions (horizontal and vertical), but can also be glued or taped on any flat surface.
Primary design objectives were:
simple conversion of the switch: Just the backplate needs to be changed
the entire setup is as flat as possibble to integrate nicely with other equipment like outlets, ports, etc