Tractor Steering Wheel by greenogre

Last crawled date: 2 years, 11 months ago

The dog ate my steering wheel!
Our dog chewed the steering wheel on our grandson's Peg Perego "John Deere" pedal tractor. A couple of evenings with OpenSCAD and here's a replacement.
Now, if I can only find a way to make the rest of the tractor look new!
Printed in PETG (this toy lives outdoors). It is an easy print but does require supports for the hub. Make sure you have plenty filament on the spool, it used used about 75m of 1.75mm filament.
The steering wheel is about 185mm in diameter so it should fit on a 200x200mm build plate.
10% infill with 3 perimeters and 3 top/bottom layers (at 0.3mm layer height). Perhaps use 4 of each if printing at 0.2
OpenSCAD source is included. (My style isn't the prettiest but it get's the job done!)