Thingiverse
TQ250 racing drone quad V2 by tamas
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is an altered version of my previous design, to enable the drone carrying a bigger camera on the top deck and accommodating a mini FPV cam on the lower deck. Reusing the robust design of the first version, easily replaceable arms in case of high speed/impact accidents :). Also reinforced landing legs, and all optimized for small printers to easy print...
Video, my first FPV flight:http://2ld.nz/S
I used the following parts to build the drone:
Naze32 10DOF flight controllerhttp://2ld.nz/g
ORX Full Range 2.4GHz 6 CH remote Controllerhttp://2ld.nz/f
Drone Matters ESC (I have no links, but I think other 12A ESC would do)
Sunny Sky X2204S 2300KV motorshttp://2ld.nz/h
props:http://2ld.nz/P
cam:http://2ld.nz/Q
FPV kit:http://2ld.nz/R
And and old big tachyon HD action cam... No
The battery(3S 1500mAh) is mounted underneath with Velcro to increase stability,
I used M3 screws and bolts to put the frame together.
And nylon spacers and screws to mount the controller and the top deck.
Video, my first FPV flight:http://2ld.nz/S
I used the following parts to build the drone:
Naze32 10DOF flight controllerhttp://2ld.nz/g
ORX Full Range 2.4GHz 6 CH remote Controllerhttp://2ld.nz/f
Drone Matters ESC (I have no links, but I think other 12A ESC would do)
Sunny Sky X2204S 2300KV motorshttp://2ld.nz/h
props:http://2ld.nz/P
cam:http://2ld.nz/Q
FPV kit:http://2ld.nz/R
And and old big tachyon HD action cam... No
The battery(3S 1500mAh) is mounted underneath with Velcro to increase stability,
I used M3 screws and bolts to put the frame together.
And nylon spacers and screws to mount the controller and the top deck.