Thingiverse
TopsCNC Belt Driven
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a modification to TopsCNC by Topsie to allow for belt driven X and Y axis. Print 2 of the Y axis mount, and one of the X axis mounts. To wire the opposite side Y axis motor, I ran the wire through the middle of the 2040 extrusion.
I initially built the TopsCNC with the linear rods, but found they were slightly bent and would bind up near the ends of the motion. I assume this should also save most people time and money, as sourcing long linear rods is not cheap nor quick, while belts are cheap and easy to get.
I just used an M4 Vslot nut and screw to mount the belts in the extrusion. You can pull the belt through the end of the extrusion to adjust tension before locking down. I suggest moving the axis back and forth to work out even tension before locking down.
Step files included for easy modification.
The Y axis mounts replace "Top_Exterior_Left_Y_Axis_v1-1.stl" and "Top_Exterior_Right_Y_Axis_v1-1.stl" in the normal design.
I initially built the TopsCNC with the linear rods, but found they were slightly bent and would bind up near the ends of the motion. I assume this should also save most people time and money, as sourcing long linear rods is not cheap nor quick, while belts are cheap and easy to get.
I just used an M4 Vslot nut and screw to mount the belts in the extrusion. You can pull the belt through the end of the extrusion to adjust tension before locking down. I suggest moving the axis back and forth to work out even tension before locking down.
Step files included for easy modification.
The Y axis mounts replace "Top_Exterior_Left_Y_Axis_v1-1.stl" and "Top_Exterior_Right_Y_Axis_v1-1.stl" in the normal design.
Similar models
thingiverse
free
"Crocodile" belt tensioner for MaXYposi by db3jhf
...th "through" holes for tensioner screw and nail.
uploaded y-axis v1 revision1 - tensioner with modified mounting holes.
thingiverse
free
belt tensioner y-axis Anet A6 by Tribolix
...ile.
have fun with this thing.
edit 23.01.2017
if you have mounted your h frame upside down, you can use the second version (v2).
thingiverse
free
TEVO Tarantula X & Y axis belts tensioners by alejandrosnz
...d the belt through the hole on the other piece. to mount the tensioner onto the y axis you have to ziptie it into the belt hole.
thingiverse
free
2040 Y axis belt tensioner rebuild for linear rails update by valius983
...1.0.0.1beb4c4dinlu8h
i also added cura file because you need to do mirror model from one that i created to do two pieces you need
thingiverse
free
X-axis Tensioner to avoid forces on Z-axis by SteevyT
... x3
3mm washer x1
3-5mm drill bit (and a tool to run it in)
the bearings, screw, and nut from the original set up on the printer.
thingiverse
free
Belt tensioning modification for Tronxy p802ea (Axis y) by Pla007
...ronxy printer of the y-axis belt tensioner.
i designed it with those screw sizes because they were the only ones i had available.
thingiverse
free
Y belt locker - Prusa i3 by fondor
...
i made this part to improve the locker system for my y axis.
easy to assembly and easy to lock the belt with a good tension.
f28
thingiverse
free
Prusa i3 X-Axis Tensioner by BillyKalfus1
...rew pulls the tensioner closer to the back of the axis mount, pulling the pulleys back, and increasing the tension in the x-axis.
thingiverse
free
Folgertech Prusa I3 X axis belt tensioner "Folgermod" by ConceptualmaN
...stops first. that mod and how to make the belt tensioner with that part are described in this video:
https://youtu.be/zhev12ntcdg
thingiverse
free
Prusa i3 MK2 X-Idler Tensioner by Jasenk
... kit came with extras that i used.
the pully slide (x-end-idler-front-tensioner) fits one way. if it's tight flip it around.
Topscnc
thingiverse
free
TopsCNC Linear by kamibal
... auf linearführung. funktioniert einwandfrei, bringt mehr stabilität.
ein video dazu.
https://www.youtube.com/watch?v=zqvuklzz1fo
thingiverse
free
TopsCNC Mod by kamibal
...gt werden 2x flansch lager 8mm (die gleichen wie an der z achse).
video dazu https://www.youtube.com/watch?v=zgwmoycobi8&t=1s
thingiverse
free
holder spindle heavy ++ pour topscnc by khinyo
...ur de broche en diamètre 65 mm renforcé pour la topscnc heavy.
en complément du support https://www.thingiverse.com/thing:4669130
thingiverse
free
TopsCNC Z Achse Platte für 1.5kW Spindel by kamibal
...tte für 1.5kw spindel by kamibal
thingiverse
das ist eine platte fur topscnc linear z achse für die aufnahme einer 1.5kw spindel
thingiverse
free
collier aspiration topscnc by khinyo
...s://www.thingiverse.com/thing:4286993
la version 60 mm d eric que l on trouve ici https://www.thingiverse.com/thing:4655694/files
thingiverse
free
TopsCNC SFU1204 Umbau by kamibal
...ur d=11,6mm
zu haben sind hier die x und y sfu1204 mutter halterung, die grundplatte hinten und passende schleppketten halterung.
thingiverse
free
Structured Remix of TopsCNC Z Axis by M_88
...z axis by m_88
thingiverse
this is a remix of the z axis parts to decrease the plastic used.
edited with autodesk inventor 2019
thingiverse
free
holder heavy ++ pour topscnc heavy by khinyo
...un peu plus large (4mm) et plus haut (6mm) que celui d'origine. cela peut être gênant pour les moteur de broche style makita.
thingiverse
free
TOPSCNC Y-Axis Endblock by Weserjunge
...end-block for the y-axis. you can use micro-switch with 9,5mm hole spacing on it for autosquare.
micro-switch like hartmann mbb1
Driven
turbosquid
$50
CHAIN DRIVEN CONVEYOR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
driven shaft of the lump crusher
...driven shaft of the lump crusher
3dexport
3d_export
$27
n95 full servo driven mask printer
...n95 full servo driven mask printer
3dexport
n95 full servo driven mask printer
turbosquid
$16
(Project) Food packing helper machine with holding clamp and press table driven by an actuator
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$47
the fifth generation of one driven two new mask machine
...ing, lamination, pressing, ear band tapping, ultrasonic, etc. the structure of the model is detailed, including model parameters.
3d_export
$15
industrial belt-driven air cooler
...leaning up necessary, just drop your models into the scene and start rendering/texturing. no special plugin needed to open scene.
3d_export
free
golf cart
...golf cart 3dexport golf cart for golfers to be driven in...
3d_export
$10
design and assembly of pulley
...pulley 3d model which is used for drive and driven ...
archive3d
free
Windmill 3D Model
...windmill 3d model archive3d wind turbine wind-driven powerplant wind-electric set windmill n181208 - 3d model (*.gsm+*.3ds)...
3d_export
$30
Compressed Air Engine 3D Model
...motor flywheel shaft camshaft piston valve block engineering compressed-air driven compressed air engine 3d model zenmunster 92451...
Belt
turbosquid
$9
Belt conveyor belt
...t conveyor belt for download as 3ds, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1226546)
3d_export
$6
belt
...d then comes off and fastens at the front of the seat. version: 2015 units: millimetres x-form: yes polys: 120 950 verts: 163 944
3d_export
$7
belt grinder
...belt grinder
3dexport
belt grinder
3d_export
$5
Belt conveyor
...belt conveyor
3dexport
belt conveyor
3ddd
$1
column belt
...column belt
3ddd
колонна
column belt
turbosquid
$5
Belt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Leather Belt
...ather belt is created in 3dsmax 2011 and rendered with vray 1.5 and it has all the texture included with the multiple obj format.
3d_ocean
$5
Belt Ring
...belt ring
3docean
belt jewelry ring
belt ring 3d model. total weight 3.5 gram & 1.1 stone size. 3dm and obj file format.
design_connected
$11
Belt Round
...belt round
designconnected
meridiani belt round computer generated 3d model. designed by parisio, andrea.
design_connected
$11
Belt Oval
...belt oval
designconnected
meridiani belt oval computer generated 3d model. designed by parisio, andrea.