Thingiverse
![Toothpaste Wringer (Looser fit) by 8BitPoro](/previews/8610846.jpg)
Toothpaste Wringer (Looser fit) by 8BitPoro
by Thingiverse
Last crawled date: 3 years, 1 month ago
If you can't print this, please consider ordering it through my 3DHub at:http://3dhubs.com/service/8Bit
The original design, the clip and pin were so tight I had to shave some off to be able to get them on and off each other without breaking them. Now they slide on with resistance, but I don't need pliers. I shaved .2mm off the outter sides of the pin where it meets the clip.
If you are going to ORDER the part from someone, please consider ordering it from my 3D hub at the link below:https://www.3dhubs.com/service/163675
Find all my designs with #8BitFPV
The original design, the clip and pin were so tight I had to shave some off to be able to get them on and off each other without breaking them. Now they slide on with resistance, but I don't need pliers. I shaved .2mm off the outter sides of the pin where it meets the clip.
If you are going to ORDER the part from someone, please consider ordering it from my 3D hub at the link below:https://www.3dhubs.com/service/163675
Find all my designs with #8BitFPV
Similar models
thingiverse
free
![Star for christmas tree by 8BitPoro](/t/8582802.jpg)
Star for christmas tree by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![FT Gremlin POD/Canopy by 8BitPoro](/t/8582799.jpg)
FT Gremlin POD/Canopy by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![FIXED - Wizard x220 bottom plate by 8BitPoro](/t/8677586.jpg)
FIXED - Wizard x220 bottom plate by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![FIXED - Wizard x220 top plate by 8BitPoro](/t/8677994.jpg)
FIXED - Wizard x220 top plate by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![45 Degree angle pigtail mount - UNIVERSAL by 8BitPoro](/t/8582782.jpg)
45 Degree angle pigtail mount - UNIVERSAL by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![Eachine 526 VTX Stack by 8BitPoro](/t/8582784.jpg)
Eachine 526 VTX Stack by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![16x19 Basic Soft Motor Mount by 8BitPoro](/t/8582775.jpg)
16x19 Basic Soft Motor Mount by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![Eachine VTX 801 Stack Mount by 8BitPoro](/t/8582785.jpg)
Eachine VTX 801 Stack Mount by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![Wraith 32 custom ESC covers by 8BitPoro](/t/8582773.jpg)
Wraith 32 custom ESC covers by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![UNIVERSAL TBS Crossfire Antenna remix by 8BitPoro](/t/8582798.jpg)
UNIVERSAL TBS Crossfire Antenna remix by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
8Bitporo
thingiverse
free
![Lithophane House by 8BitPoro](/t/8582801.jpg)
Lithophane House by 8BitPoro
...can use most light fixtures, including a standard led bulb.
use supports for the base only, supports are not needed for the roof.
thingiverse
free
![Car Freshener with lid by 8BitPoro](/t/8629429.jpg)
Car Freshener with lid by 8BitPoro
...r what ever else scented powder/herb you want into the base, screw the lid on and hang from the hole on the top. boom, freshness.
thingiverse
free
![Star for christmas tree by 8BitPoro](/t/8582802.jpg)
Star for christmas tree by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![Eachine 526 VTX Stack by 8BitPoro](/t/8582784.jpg)
Eachine 526 VTX Stack by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![FT Gremlin POD/Canopy by 8BitPoro](/t/8582799.jpg)
FT Gremlin POD/Canopy by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![Mexican train dominoes set by 8BitPoro](/t/8582774.jpg)
Mexican train dominoes set by 8BitPoro
...nd a slightly adjusted base. some of the previous pieces were not really easily printable, and as a result have been swapped out.
thingiverse
free
![FIXED - Wizard x220 bottom plate by 8BitPoro](/t/8677586.jpg)
FIXED - Wizard x220 bottom plate by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![FIXED - Wizard x220 top plate by 8BitPoro](/t/8677994.jpg)
FIXED - Wizard x220 top plate by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
thingiverse
free
![Wraith 32 custom ESC covers by 8BitPoro](/t/8582773.jpg)
Wraith 32 custom ESC covers by 8BitPoro
...ase consider ordering it from my 3d hub at the link below:https://www.3dhubs.com/service/163675
find all my designs with #8bitfpv
Wringer
3d_export
$40
![Kitchen utensils kit 3D Model](/t/125179.jpg)
Kitchen utensils kit 3D Model
...3dexport kitchen cooking utensils ladle skimmer boat scissors nutcracker wringer support colander slotted spoon kitchen utensils kit 3d model...
3d_sky
$8
![bucket with wringer](/t/996445.jpg)
bucket with wringer
...bucket with wringer
3dsky
bucket with wringer, textures are not required
thingiverse
free
![Toothpaste Wringer (65mm clearance)](/t/4832724.jpg)
Toothpaste Wringer (65mm clearance)
...spring based ratchet.
you can lift up the outer ring of the turnkey to release the ratchet and remove whatever you have in there.
thingiverse
free
![Toothpaste Wringer by kainezq](/t/8929695.jpg)
Toothpaste Wringer by kainezq
...ing based ratchet.
you can lift up the outer ring of the turnkey to release the ratchet and remove whatever you have in there.
thingiverse
free
![vegetable wringer by mgvpalma](/t/8607115.jpg)
vegetable wringer by mgvpalma
... is a useful tool when you have to wash vegetables, like lettuce, and you need to drain or dry it inside a cylindrical container.
thingiverse
free
![Wipe Wringer by CrackBaron](/t/8889828.jpg)
Wipe Wringer by CrackBaron
...e, to wring out a wet wipe or cloth.
because you only need one hand to use this, it is very practical for people with a handycap.
thingiverse
free
![Resin wringer for Anycubic Photon Mono X by Zylgross](/t/8347528.jpg)
Resin wringer for Anycubic Photon Mono X by Zylgross
....
esta perfectamente pensado para usarlo incluso con la cúpula puesta y dejarlo todo el tiempo que se quiera
espero que os guste!
thingiverse
free
![Modular wringer for dishes by CarlosGuerrero](/t/8937295.jpg)
Modular wringer for dishes by CarlosGuerrero
...in you kitchen!
it comes with 3 diferent types of plugs, bur remmember to print them at least of 0.3mm layer hight.
have fun!
thingiverse
free
![Resin wringer for Anycubic Photon Mono X by Zylgross](/t/8347403.jpg)
Resin wringer for Anycubic Photon Mono X by Zylgross
....
esta perfectamente pensado para usarlo incluso con la cúpula puesta y dejarlo todo el tiempo que se quiera
espero que os guste!
Looser
thingiverse
free
![Resistor container looser tolerance](/t/4698207.jpg)
Resistor container looser tolerance
...resistor container looser tolerance
thingiverse
i increased the tolerances on the tray holder dovetail.
mine were a little tight
thingiverse
free
![Skadis Hook - Looser Fit by chrishuck](/t/8121401.jpg)
Skadis Hook - Looser Fit by chrishuck
...little too tight on the pegboard, so i moved the pin down 0.5mm to create a little bit looser fit for when i want to relocate it.
thingiverse
free
![Looser buttons for PiGRRL Gameboy by shaische](/t/8822337.jpg)
Looser buttons for PiGRRL Gameboy by shaische
...meboy console by adafruit as we found that the buttons we printed wouldn't "click" because they were a bit too big.
thingiverse
free
![Capo - Slightly looser version of the capo by LOBOCNC by whitewolf103187](/t/8905318.jpg)
Capo - Slightly looser version of the capo by LOBOCNC by whitewolf103187
...easily.
printed with pla with 5 vertical shells and 40% honeycomb infill. spring area is full solid and actuates pretty easily.
thingiverse
free
![Fidget Three with Planetary Gear Center (looser tolerances) by abarry](/t/8619275.jpg)
Fidget Three with Planetary Gear Center (looser tolerances) by abarry
...nter (looser tolerances) by abarry
thingiverse
scaled the inner parts down to 97.5% so that it would spin well on my mp mini v1.
thingiverse
free
![Y Block with looser holes by bexwhitt](/t/8712808.jpg)
Y Block with looser holes by bexwhitt
...er to free the y tensioner. i also added a bit more meat to the top of the block to so the bigger holes don't weaken the part
thingiverse
free
![Hive Hex Drawers looser tolerance by Hazzmatt](/t/8608898.jpg)
Hive Hex Drawers looser tolerance by Hazzmatt
...made my own from scratch. solidworks files attached too if you want to edit. i made them just slightly smaller, but a bit longer.
thingiverse
free
![Ender 3 Pro Rail Cover v3 with looser click on clips for a better fit by DonDonut](/t/8192293.jpg)
Ender 3 Pro Rail Cover v3 with looser click on clips for a better fit by DonDonut
...ed the ender 3 pro rail cover updated to v3 by da_syggy to better fit my ender 3 pro, the clips were too tight to fit in my rail.
thingiverse
free
![chain improvement by Baigars](/t/8754281.jpg)
chain improvement by Baigars
...easy assembly and also the tolerance are little bit looser ...
Toothpaste
3ddd
free
![Toothpaste](/t/826807.jpg)
Toothpaste
...toothpaste
3ddd
toothpaste , зубная паста
toothpaste
turbosquid
free
![Toothpaste](/t/13445396.jpg)
Toothpaste
...bosquid
royalty free 3d model toothpaste for download as max on turbosquid: 3d models for games, architecture, videos. (1612043)
turbosquid
$10
![toothPaste](/t/13413864.jpg)
toothPaste
...
royalty free 3d model toothpaste for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1692765)
3ddd
$1
![toothbrush and toothpaste](/t/595758.jpg)
toothbrush and toothpaste
...toothbrush and toothpaste
3ddd
зубная щетка , паста
toothbrush and toothpaste
turbosquid
$25
![Toothpaste](/t/13376362.jpg)
Toothpaste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
![Toothpaste](/t/13485211.jpg)
Toothpaste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
![Toothpaste](/t/13362543.jpg)
Toothpaste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
![Toothpaste](/t/13264072.jpg)
Toothpaste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![Toothpaste](/t/13250722.jpg)
Toothpaste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![Toothpaste](/t/13348863.jpg)
Toothpaste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fit
turbosquid
$21
![Fitting](/t/13438309.jpg)
Fitting
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![fitness](/t/13260173.jpg)
fitness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![Fitness](/t/13236075.jpg)
Fitness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![fitness](/t/13299415.jpg)
fitness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![fittings](/t/11928758.jpg)
fittings
...fittings
3dexport
low poly 3d model for games
3d_export
$5
![fittings](/t/11931477.jpg)
fittings
...fittings
3dexport
low poly 3d model for game
3d_export
$30
![pipe fit](/t/11461204.jpg)
pipe fit
...pipe fit
3dexport
this models basically used for pipe fitting
3d_ocean
$19
![Fitting room](/t/591818.jpg)
Fitting room
...m fitting fitting room furniture interior materials photorealistic restaurant table textured wardrobe
fitting room with textures.
turbosquid
free
![Fitness equipment, technogym tools, fitness ball](/t/13496630.jpg)
Fitness equipment, technogym tools, fitness ball
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![ITRE FIT](/t/813938.jpg)
ITRE FIT
...itre fit
3ddd
itre
itre fit, моделировалась по фото. высота 800 мм, диаметр одного - 130 мм.