Cults
Toothless Herb Grinder 2.0 By 420ThreeD
by Cults
Last crawled date: 6 years, 2 months ago
To Combat piracy these are now on sale officially on etsy here:
https://www.etsy.com/uk/shop/BristolNoodle
Accept no imitations!
A 3D Printable Grinder that doesn't leave plastic bits in the mix (serious health hazard)
You will need to get the first layer of the grinder file down perfectly for this to work....
Glass is best....
Assemble as per the exploded view, make sure the thin grind plate goes into the mid case, fillet side down!, (first layer side up) Cannot stress this enough to get a good grind, it will also be a tight fit, (for good reason) See Last Print setting for this piece.
MidCase might need sanding slightly on the inner surfaces to ensure a smooth turn, but not too much or it will be loose.
I lubed the outer surface of the top grinder with hemp oil for even easier shredding!
There is also a bowl adaptor to use in place of the base 'catcher' for the pipe fans out there!
Now it dispenses too...
1.5hrs for each file - 20mins Grinder Plate.
Please note you'll need to print base3.9 & LargeParticlePlate on 100% infill.
A note on the operation, be gentle, then firm;
Evenly load the inner grinding plate.
Gently twist counter clock-wise first, applying a small amount of pressure to get it going,
Then use a smidge more force, but keep the rotation speed moderate. Love your buds, don't crush them ;) x
Happy Slicing!
https://www.etsy.com/uk/shop/BristolNoodle
Accept no imitations!
A 3D Printable Grinder that doesn't leave plastic bits in the mix (serious health hazard)
You will need to get the first layer of the grinder file down perfectly for this to work....
Glass is best....
Assemble as per the exploded view, make sure the thin grind plate goes into the mid case, fillet side down!, (first layer side up) Cannot stress this enough to get a good grind, it will also be a tight fit, (for good reason) See Last Print setting for this piece.
MidCase might need sanding slightly on the inner surfaces to ensure a smooth turn, but not too much or it will be loose.
I lubed the outer surface of the top grinder with hemp oil for even easier shredding!
There is also a bowl adaptor to use in place of the base 'catcher' for the pipe fans out there!
Now it dispenses too...
1.5hrs for each file - 20mins Grinder Plate.
Please note you'll need to print base3.9 & LargeParticlePlate on 100% infill.
A note on the operation, be gentle, then firm;
Evenly load the inner grinding plate.
Gently twist counter clock-wise first, applying a small amount of pressure to get it going,
Then use a smidge more force, but keep the rotation speed moderate. Love your buds, don't crush them ;) x
Happy Slicing!
Similar models
cults
$28
Herb Grinder Oahu Hawaii Herbal
...
cults
herb grinder herbal 420
herbal grinder works great, the more you grind the finer it gets good enough for magic flight box.
cults
free
Toothless Herb Grinder 1.0 By 420ThreeD
...control check. improving upon the original, i've produced a similar design for you lovely, smokey printer fanatics - print...
cults
free
Ocarina Of Time (7 Holes)
...ote: the ring doesn't need any supports
you can see the actual mesures in the images.
and yes, it works. have a nice print!
cults
free
Butterfly Coasters - Multi Colour with one Nozzle!
... resolution.
for the holder we simply printed ours in our clear water filament but i am sure this would look great in any colour.
cults
free
Shoulder rig for DSLR (NOT just for Canon 5D)
...same place,and the links is:https://item.taobao.com/item.htm?spm=a1z09.2.0.0.ngtbda&id=45114001387&_u=765kgh6babe
cults
free
Modus Predator MK8 Cooling mod.
...d of re-printing the entire tubes, i just made a small notch for the wires to come through and still allow the box to snap tight.
cults
free
Magnet ACME Key Holder
...port.
you will need to use 1 neodymium's magnet (radius 10mm) for each side, if yours keys are to have use two per each side
cults
free
T-800 Single and 3 Piece High Detail Head
...i might even cut out the eyes and make them all seperate and also add the cpu core screw cap :)
remix from tosch & landru
cults
free
Blank Mask
...lpting program (right now i use sculptris or blender). i've included the .obj file for easy importing into sculptris as well.
cults
free
Attack on Titan - Female Titan
...empt at a model using zbrushcore.
this file measure 250mm high. if you do scale it down print the hair first to see if it works.
420Threed
cults
free
ShredderCard Herb Grinder by 420ThreeD
...b.
if you require a more solid grinding solution see here:
https://cults3d.com/en/tool/toothless-herb-grinder-2-0-from-420threed
cults
free
Toothless Herb Grinder 1.0 By 420ThreeD
...bliterates evenly up to 2g of herb within three turns.
please read the print settings and see the image for assembly guidelines.
Toothless
cults
$6
Toothless
..._without_supports" is uploaded now as well, in case you would like to scale it and put your own supports on. happy printing!
cults
free
Toothless Herb Grinder 1.0 By 420ThreeD
...bliterates evenly up to 2g of herb within three turns.
please read the print settings and see the image for assembly guidelines.
cults
free
ShredderCard Herb Grinder by 420ThreeD
...you require a more solid grinding solution see here: https://cults3d.com/en/tool/toothlessherb-grinder-2-0-from-420threed ...
Grinder
cults
free
part for grinder
...part for grinder
cults
part for grinder
part for grinder
cults
$12
herb grinder
...herb grinder
cults
weed grinder herb
bio-plastic grinder made in pla
cults
$3
Grinder perso
...grinder perso
cults
grinder/moulin à herbes , épices , etc... peut encombrant et un design unique .
cults
$4
Ganja Grinder
...haut de gamme, extrêmement discret et leger,impression 3d.
motif feuille de ganja
dimensions :
-diamètre : 55mm
-hauteur : 40mm
cults
$2
Customizable Crusher Grinder!
...t name of the person.
on the model stl provided, a cannabis leaf is drawn.
update: shrinking teeth for better strength.
cults
$5
Death Star Grinder
... arts
star wars death star grinder hq model
i tried to replicate the best i could the *cities* so the lines are not random
cults
$28
Herb Grinder Oahu Hawaii Herbal
...
cults
herb grinder herbal 420
herbal grinder works great, the more you grind the finer it gets good enough for magic flight box.
cults
$25
grinder a manivelle perso bee happy
...nder at crank custom bee happy
grinder à manivelle , avec 4 lames et 2 couvercles , simple à utiliser et un plaisir à assembler.
cults
$25
Grinder transversal
...st si simple qu'il serait difficile de ne pas l'utiliser! avec une longueur de 10 cm , il se loge utilement dans la poche
cults
free
ShredderCard Herb Grinder by 420ThreeD
...b.
if you require a more solid grinding solution see here:
https://cults3d.com/en/tool/toothless-herb-grinder-2-0-from-420threed
Herb
cults
$12
herb grinder
...herb grinder
cults
weed grinder herb
bio-plastic grinder made in pla
cults
free
Keyring for herbs
...keyring for herbs
cults
keyring for herbs
keyring that carries your daily dose of tea.
cults
$1
herbs Jar
...herbs jar
cults
jar herbs jar grass jar weed jar medical marijuana
small jar
cults
free
Counter Top Herb and Spice Planter
...counter top herb and spice planter
cults
counter top herb and spice planter
counter top herb and spice planter
cults
free
6 Plant Modular Herb and Spice Planter
...6 plant modular herb and spice planter
cults
6 plant modular herb and spice planter
6 plant modular herb and spice planter
cults
free
ShredderCard Herb Grinder by 420ThreeD
...b.
if you require a more solid grinding solution see here:
https://cults3d.com/en/tool/toothless-herb-grinder-2-0-from-420threed
cults
$28
Herb Grinder Oahu Hawaii Herbal
...
cults
herb grinder herbal 420
herbal grinder works great, the more you grind the finer it gets good enough for magic flight box.
cults
free
The Count Herb & Garlic Grinder (KITCHEN)
...n, check the stl file at the end ;)
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
free
Toothless Herb Grinder 1.0 By 420ThreeD
...bliterates evenly up to 2g of herb within three turns.
please read the print settings and see the image for assembly guidelines.
0
cults
free
SquareMix 0
...3dmodel mathematics jewellry 3dp 3dpendant mix
pendant with unique design.
ready for 3d printing.
for a perfect gift !
enjoy! :)
cults
free
Test piece for the functional game (0 / 0.05 / 0.1 / 0.2 / 0.3 / 0.4 / 0.5)
...ticipate the shrinkage or widening of your hole, and to test the functional play suitable for your design requiring intertwining.
cults
free
A piranha Fish | you all must have need this one :0
...eir classification as omnivorous.
in venezuela, they are called caribes. they are known for their sharp teeth and powerful jaws.
cults
free
Support
...support cults gadget ergonomic smartphone support useful 0 ...
cults
free
Binary Numbers, Base Two System, Place Values
...the number piece has "1" on the front and "0quot; on the back. i have designed the numbers for...
cults
free
Zero Model, Negative & Positive Numbers
...into the small box on each side (at about 80 completion when printing). the magnets will then be fully...
cults
free
Coin punch
...coin punch cults figure multi-use coin punch from 0 to 9 height 4cm. writing style: comic without ms...
cults
free
Stamps stamps number _ Number plasticine stamps
...these stamps to print in 3d: all numbers from 0 to 9 as well as mathematical signs + -...
cults
free
10-sided die, d10, decahedral
... are numbered from 0 to 9. the opposite faces are always 9. the zero can be 0 or 10 depending on your choice.
dice size: 4,4 cm.
cults
free
Rotor Riot Coaster
...layer = 3 shell = 3 top layer = 0* ...
2
cults
free
2 Ball 2 Socket Joint
...2 ball 2 socket joint
cults
2 ball socket joint
2 ball 2 socket joint
cults
free
Bracelet No 2
...bracelet no 2
cults
bracelet no 2
bracelet no 2
cults
free
Pendants 2
...pendants 2
cults
pendants 2
pendants 2
cults
free
Trophy 2
...trophy 2
cults
trophy 2
trophy 2
cults
free
Elf 2
...elf 2
cults
elf 2
elf 2
cults
free
Vase_Unicofil-2
...vase_unicofil-2
cults
vase_unicofil-2
vase_unicofil-2
cults
free
SPEyewear 2
...speyewear 2
cults
speyewear 2
speyewear 2
cults
free
Door hanger 2 - Do Not Disturb 2
...door hanger 2 - do not disturb 2
cults
door hanger 2 - do not disturb
door hanger 2 - do not disturb 2
cults
free
Ultimaker 2 and 2+ Filament guide for big spools
...ment guide for big spools
cults
ultimaker 2 and 2+ filament guide for big spools
ultimaker 2 and 2+ filament guide for big spools
cults
free
2 € each
...2 € each
cults
piece
modeling piece of 2 € surs sketchup