Tool Holder for Original Prusa i3 MK3 & MK2/MK2S by acorderob

Last crawled date: 3 years ago

Tool holder for the Prusa MK3 (and MK2/MK2S). Made for the tools I use the most. The version for the MK2/MK2S is the same except for an additional 5mm in the length of the clip.
Photos are from a previous version but there is almost no visual difference.
2019/01/27: Redesigned the clip. Seems to be ok now, but I added a new stl with only the clip so you can test it for clearances before you print the whole thing. Watch the infill percentage. Retouched a few other minor details and I removed the old v20 to avoid clutter.
2019/01/10: Warning! the printing head might clash with the clip if it tries to get to the far right at its height position. I could shave 2mm from it to avoid this but this would make it weak and would probably break easily. I have to rethink the clip position. Stay tuned.
2019/01/03: Slight redesign of the pen and deburring tool slots in v30 (now v32) to avoid them falling out due to printing vibrations.
2018/12/30: Added expanded version (v30) to add space for MMU2 tools and other things. Old version is v20.
2018/08/30: Added a variant for the MK2/MK2S.