Thingiverse
Tool for arrow feather by Print3dProjects
by Thingiverse
Last crawled date: 4 years, 7 months ago
Archery tool for mounting feathers.
Very easy to mount! Need M3 nuts inside "Columna" at both side of 3 pieces.
Also need 6 screw DIN7991 M3x18 or more and a cut of 2.85mm filament to pin the arrow (see pictures).
Very easy to use!!
First you have to insert the arrow in the tool.
Then you put feather into "Fixador de plomes" and glue it.
Once you glued feathers onto arrow remove "Fixador de plomes".
Finally you turn it counter clockwise to remove the arrow from the tool.
Very easy to mount! Need M3 nuts inside "Columna" at both side of 3 pieces.
Also need 6 screw DIN7991 M3x18 or more and a cut of 2.85mm filament to pin the arrow (see pictures).
Very easy to use!!
First you have to insert the arrow in the tool.
Then you put feather into "Fixador de plomes" and glue it.
Once you glued feathers onto arrow remove "Fixador de plomes".
Finally you turn it counter clockwise to remove the arrow from the tool.