Thingiverse
TomoQuads HD Chopstick CS3 Cinewhoop Conversion for Naked GoPo Hero 5 / 6 / 7 by wrong17
by Thingiverse
Last crawled date: 4 years, 4 months ago
I created a few 3D printed parts to covert a TomoQuads Chopstick CS3 fame to a cinewhoop with prop guards and can carry a Naked GoPro and still be under 250g with a 650mah 4s Lipo. There are 2 variations:
Standard: When the FPV camera is recessed in between the prop guard. With the prop guards you lose about 2/3 of your FPV view.
Extended: The FPV camera is pushed forward 35mm and now there is NO props or prop guards in camera's view.
Here is more detail of this build: https://rotorbuilds.com/build/27271
Standard: When the FPV camera is recessed in between the prop guard. With the prop guards you lose about 2/3 of your FPV view.
Extended: The FPV camera is pushed forward 35mm and now there is NO props or prop guards in camera's view.
Here is more detail of this build: https://rotorbuilds.com/build/27271