Thingiverse
ToAuto Pyramid A1.1 tool drawer, deeper by MattInDetroit
by Thingiverse
Last crawled date: 3 years ago
I was asked to help make some changes to the previous design.
There are now four versions of the drawer cabinet:
1) Same size (and number of drawers), but with the back support bar preattached (rather than glued on).
2) 120MM deeper, with back support bar. Smaller drawer is now on top. There are now two large drawers, and they are now deeper by 120MM; which will have them end right before the next 2040 aluminum v-slot.
3) 160MM deeper, with back support bar. Smaller drawer is now on top. There are now two large drawers, and they are now deeper by 160MM; which will have them end on the other side of the next 2040 aluminum v-slot, nesting up to the power supply.
4) 120MM deeper, with back support bar. Smaller drawer is now on top. There are now two large drawers, and they are now deeper by 120MM; which will have them end right before the next 2040 aluminum v-slot. But also with material removed to reduce print time.
There are now two additional versions of the "Drawer1" or larger drawer.
1) 120MM deeper
2) 160MM deeper
The STL load into Cura with no errors. MeshMixer thinks the files need repairing, and winds up removing necessary parts.
I have NOT done test prints for this iteration (as my previous drawer cabinet already has the back support glue on). The three drawer versions assumes your printer has already been lifted up with the squash foot isolator modification. I'm pretty sure the back support is at the correct height, but a sliced/partial print should still be done to confirm.
The cabinets will likely now need supports are otherwise be rotated to print properly.
Note: I saw in one of the remixes that the drawers and cabinet's depth were all made to extend about 30mm further from the front of the printer. I did NOT do that as it would be blocked by the red "L" bracket that holds the foot of the printer. When the other versions were made wider, they did not go back and correct the right mounting tab... which resulted in their drawer cabinet being pushed away from the right side of the printer (rather than sitting flush). My versions have the tab corrected, which results in the cabinets sitting flush to the right 2040 extrusion, and having the red L bracket sit slightly in front of the cabinet.
The v2 files I moved the back support beam up by 0.7MM. Should be better aligned now. (I'm removing the other three files, so they aren't accidentally used).
There are now four versions of the drawer cabinet:
1) Same size (and number of drawers), but with the back support bar preattached (rather than glued on).
2) 120MM deeper, with back support bar. Smaller drawer is now on top. There are now two large drawers, and they are now deeper by 120MM; which will have them end right before the next 2040 aluminum v-slot.
3) 160MM deeper, with back support bar. Smaller drawer is now on top. There are now two large drawers, and they are now deeper by 160MM; which will have them end on the other side of the next 2040 aluminum v-slot, nesting up to the power supply.
4) 120MM deeper, with back support bar. Smaller drawer is now on top. There are now two large drawers, and they are now deeper by 120MM; which will have them end right before the next 2040 aluminum v-slot. But also with material removed to reduce print time.
There are now two additional versions of the "Drawer1" or larger drawer.
1) 120MM deeper
2) 160MM deeper
The STL load into Cura with no errors. MeshMixer thinks the files need repairing, and winds up removing necessary parts.
I have NOT done test prints for this iteration (as my previous drawer cabinet already has the back support glue on). The three drawer versions assumes your printer has already been lifted up with the squash foot isolator modification. I'm pretty sure the back support is at the correct height, but a sliced/partial print should still be done to confirm.
The cabinets will likely now need supports are otherwise be rotated to print properly.
Note: I saw in one of the remixes that the drawers and cabinet's depth were all made to extend about 30mm further from the front of the printer. I did NOT do that as it would be blocked by the red "L" bracket that holds the foot of the printer. When the other versions were made wider, they did not go back and correct the right mounting tab... which resulted in their drawer cabinet being pushed away from the right side of the printer (rather than sitting flush). My versions have the tab corrected, which results in the cabinets sitting flush to the right 2040 extrusion, and having the red L bracket sit slightly in front of the cabinet.
The v2 files I moved the back support beam up by 0.7MM. Should be better aligned now. (I'm removing the other three files, so they aren't accidentally used).
Similar models
thingiverse
free
2020 - 2040, m5 Flat Head Bolt, Aluminum Corner Angle Bracket by StarSOzi
...ther two positions.
i have created a smaller version to fit the right-front corner and the back-center.
a m3-.50 nut is required.
grabcad
free
Balancing Back Chair v2
...a straight back and not hunching over. i have bean using this and back chair for almost a year now and it improved my back a lot.
grabcad
free
80/20 20mmx40mm 45 Degree Support, 160mm Long
...40mm 45 degree support, 160mm long
grabcad
80/20 aluminum extrusion
20-2040 45 degree support, 160mm long
part number: 20-2566
thingiverse
free
2040 V-Slot Inside corner support by AlwaysExploring
...40 v-slot. i also made a single support for the places where the 2040 is vertically placed on the 20 side of the 2040 extrusion.
thingiverse
free
2040 Filament Guide for AM8 by Cyberlamb
...s.
filament guide that uses the v-slots in the 2040 aluminum extrusion to mount it.
requires open access to the top bar to mount.
grabcad
free
Back Balancing chair 01
...traight back and not hunching over. i have bean using this and back chair v2 for almost a year now and it improved my back a lot.
thingiverse
free
Drawer slide rear socket by grooverut
... wheels to slide out.
print with supports everywhere. i printed with pla. it works for now, but i don't know about long term.
thingiverse
free
VKB Gunfighter III Mount for 2040 Exstrusion tubbing by dracekaraki
... and the back-center.
a m3-.50 nut is required.
added additional support for mounting to a 2040 extrusion tubing
with m5-20 .80.
thingiverse
free
Y Axis Smooth Rod Support by Oblivion
...livion
thingiverse
these were made for 2040 extruded aluminum bars. their slot design enables easy leveling of the smooth rods.
thingiverse
free
Scania V8 sign removed eagle slot by GeiloMB
...ther two positions.
i have created a smaller version to fit the right-front corner and the back-center.
a m3-.50 nut is required.
Toauto
thingiverse
free
Endstops without sensors for ToAuto / Koonovo Pyramid or Creativity CY300 by ColdBeerMt
...re virtually the same one):
creativity cy300
toauto pyramid a1.1
koonovo pyramid a1.1
i added obj files if you want to modify it.
thingiverse
free
Pyramid A1.1 by dvpmike
...by dvpmike thingiverse i remixed this to fit the toauto pyramid...
thingiverse
free
Pyramid A1.1 tool drawer by MattInDetroit
...tool drawer by mattindetroit thingiverse storage drawers for the toauto pyramid a1.1 3d...
thingiverse
free
Left Side BLTouch Bracket by wlbillmartin
...bracket by wlbillmartin thingiverse left side bltouch mount for toauto pyramid...
thingiverse
free
Test Disk by wlbillmartin
...disk mentioned in the martin labs bltouch on the toauto pyramid a1...
thingiverse
free
Pyramid A1.1 Cooling Fan by ChrisS373
...fan by chriss373 thingiverse cooling fan duct for the toauto pyramid a1.1 3d printer. mounts to stock 50mm cooling...
thingiverse
free
Pyramid A1.1 dual fan duct by ricardocolonia
...is a replacement for the stock fan of the toauto pyramid a1.1 use abs, it will be close to...
thingiverse
free
BL Touch Auto Leveling Armf by ChrisS373
...armf by chriss373 thingiverse auto leveling arm for the toauto pyramid a1.1 printer. the original one was too flexible...
thingiverse
free
Pyramid A1.1 Cooling Fan by ChrisS373
...cooling fan duct for a 50mm blower on a toauto pyramid a1.1 printer. easily mounts to replace original fan...
Mattindetroit
thingiverse
free
Customizable angle L bracket by MattInDetroit
...customizable angle l bracket by mattindetroit
thingiverse
customizable angle l bracket.
thingiverse
free
Pyramid A1.1 tool drawer by MattInDetroit
...pyramid a1.1 tool drawer by mattindetroit
thingiverse
storage drawers for the toauto pyramid a1.1 3d printer.
thingiverse
free
Customizable angle L bracket by MattInDetroit
...e l bracket by mattindetroit
thingiverse
customizable "l" angle brackets
optional screw holes, and counter sunk holes.
thingiverse
free
Baby Yoda Vomit new Cap #2 by MattInDetroit
...baby yoda vomit new cap #2 by mattindetroit
thingiverse
another remix of a remix. baby yoda toothpaste vomit
thingiverse
free
Boob Valve Cap by MattInDetroit
... onto the valve stem). works on north american schrader valves.
petg will last longer in the sun. pla, for a gag, is sufficient.
thingiverse
free
Customizable Key Cap (with doubled sided text) by MattInDetroit
... sides of a key cap, for easy identification. remixed the original single sided version (from bssstudio), to support both sides.
thingiverse
free
Easter Bunny door decoration by MattInDetroit
...n the slicer for printing, resulting in a height of about 9" when done. rotate to lay flat, and no supports will be needed.
thingiverse
free
Acrylic Paint Bins for Harbor Freight's Portable Parts Storage Cases by MattInDetroit
...ght's portable parts storage cases by mattindetroit
thingiverse
bin or bin tray insert for storing 34mm/2fl oz acrylic paint
thingiverse
free
Phallic Tire Valve Cap by MattInDetroit
...ads get created the first time you screw them onto the valve.
for non-us valves you may have to modify the mix file in meshmixer.
thingiverse
free
R2Drink2 - R2D2 Can to Stein by MattInDetroit
...te simpsons stonecutter stein for 12oz and 16oz cans: https://cults3d.com/en/3d-model/home/stonecutter-can-12oz-and-16oz-to-stein
Deeper
3d_export
$54
Skin Anatomy
...tough connective tissue, hair follicles, and sweat glands. the deeper subcutaneous tissue (hypodermis) is made of fat and connective...
3d_export
$30
Boeing 747
...compared to the 747-400; the wing is thicker and deeper holding more fuel, and wider with raked wingtips. the...
3d_export
$16
home tableware
...3dexport a collection of home tableware.<br>the set includes:<br>plate (274 vertices)<br>deeper soup plate (274 vertices)<br>small bread plate (194 vertices)<br>dessert bowl...
thingiverse
free
deeper LCD box by stefi01
...deeper lcd box by stefi01
thingiverse
deeper box which sorts out the focus problem
thingiverse
free
Deeper Sonar Mount, Крепление эхолота Deeper by slavaon
...he echo sounder, m5x16 bolts were used. to assemble the product, m5x25 bolts with m5 nuts were used. all stainless steel hardware
thingiverse
free
Deeper Sports Drink Lid Pill Case
...ainer with deeper threads so that the cap can seal to the top of the container.
new part is about 50% deeper than the original.
thingiverse
free
CR10_BMG_Direct_Drive_Fan_Mount_with_insert 1mm deeper 5mm longer
...mm deeper 5mm longer
thingiverse
the fanmount is 1mm deeper and 5mm longer. the orignal fanmount didnt fit perfecty for cooling.
thingiverse
free
Deeper Rim for airless tire by Voss3090
... tire by voss3090
thingiverse
this model is .1 deeper within the hub nut. i had trouble getting on the nut to hold the wheel on.
thingiverse
free
Star Tealight Candle Holder - Remix deeper
...star tealight candle holder - remix deeper
thingiverse
i just modify to have a deeper hole.
thingiverse
free
Desktop Organizer, deeper pad by mef51
...e
a lil modification of http://www.thingiverse.com/thing:223393
made the pen pad square a little deeper to hold it more securely
A1
3d_export
$15
m16 a1
...m16 a1
3dexport
3d m16 a1 assault rifle not complete with mechanisms. good for 3d printing.
turbosquid
$15
chair a1
...urbosquid
royalty free 3d model chair a1 for download as max on turbosquid: 3d models for games, architecture, videos. (1282603)
3d_ocean
$89
Audi A1
...economy family family german german luxury luxury model model modern modern style style vehicle vehicle
audi a1 detailed 3d model
turbosquid
$70
A1.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
A1 Receptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Asteroid-A1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Cubicle-A1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
mazu a1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
A1 rim
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Masiero classica 8010-A1
...masiero classica 8010-a1
3ddd
masiero
бра: masiero classica 8010-a1
артикул: 8010-a1
высота: 32 см
Pyramid
3d_export
free
pyramid
...pyramid
3dexport
pyramid for you
3d_export
free
conical pyramid
...conical pyramid
3dexport
beautiful pyramid
turbosquid
$300
Pyramid
...id
royalty free 3d model pyramid for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1578437)
3d_export
$5
Pyramid
...pyramid
3dexport
turbosquid
$3
Pyramid
...yalty free 3d model pyramid for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1198985)
turbosquid
$2
Pyramid
...lty free 3d model pyramid for download as 3ds, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1273189)
3d_export
$5
pyramid-headed
...pyramid-headed
3dexport
unfinished version of the pyramid head
turbosquid
$5
Pyramid
...ree 3d model pyramid for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1188226)
turbosquid
$40
pyramid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
pyramids
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Drawer
3d_export
$5
chest of drawers with drawers sonata
...chest of drawers with drawers sonata
3dexport
chest of drawers with drawers sonata
archibase_planet
free
Drawer
...drawer
archibase planet
drawer case locker
drawer - 3d model for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
drawer dathroom furniture
drawer 896410 - 3d model for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
drawer shelving case
drawer - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
locker bureau drawer
drawer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
case drawer locker
drawer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
locker drawer case
drawer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
drawer case bathroom furniture
drawer 896411 - 3d model for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
locker drawer case
drawer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drawer
...drawer
archibase planet
locker case drawer
drawer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Tool
turbosquid
$21
Tool box with tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
Tools
...tools
archibase planet
tools instruments implements
tools n070114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_ocean
$12
Tools
...tools
3docean
hammer metal old screw tools wrench
maya
turbosquid
$6
Tool Cart / Tool Box
...
royalty free 3d model tool cart / tool box for download as on turbosquid: 3d models for games, architecture, videos. (1241859)
3d_ocean
$15
crimp tool
... tool copper cutter crimp crimp tool electrical electrical tools press tools pressing tool tools wire cutter
created in maya 2013
3d_ocean
$5
Tools
...tools
3docean
3d models paint tools work
3d,models,works,paint,art,create,working,
3d_export
free
tools
...tools
3dexport
coldsteel
turbosquid
$15
Tools
...turbosquid
royalty free 3d model tools for download as blend on turbosquid: 3d models for games, architecture, videos. (1331352)
3ddd
$1
bar tool
...bar tool
3ddd
барный
bar tool
turbosquid
$35
tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)