Thingiverse
TK1 telegraph key base by kmcallister5
by Thingiverse
Last crawled date: 4 years ago
This is a simple base for a TK1 Soviet telegraph key. Although it doesn't really provide enough weight for efficient use of the key, it is compact and portable. The base is attached with four M3×16mm nut/screw pairs.
Two versions are provided. One requires supports, the other uses a sacrificial layer above the nut hole that you can drill out after printing or simply push out with the end of a screw (I found it's slightly cleaner to push from the nut side, opposite of the final orientation of the screw as installed).
Two versions are provided. One requires supports, the other uses a sacrificial layer above the nut hole that you can drill out after printing or simply push out with the end of a screw (I found it's slightly cleaner to push from the nut side, opposite of the final orientation of the screw as installed).