Thingiverse
Titanfall Dataknife fast relase pouch with strap slot
by Thingiverse
Last crawled date: 5 years, 10 months ago
Pouch for Titanfall dataknife. Tested fitting with TF1 version of blade, TF2 blade should also work but yet to be checked.
Printing: No supports needed, tested in PET-G on Prusa I3mk2s. Layer height between 0.1 and 0.25mm, infill doesn't really matter
Assembly: Glue some small pieces of EVA foam (or anything else that is squishy and can grip the blade) inside of the two printed parts tto provide friction that holds the knife. Test if friction is high enough. Glue together two halves of pouch, pass a strap through the strap holding slot (designed for a 19mm wide and 1mm thick strap, but not yet tested)
Printing: No supports needed, tested in PET-G on Prusa I3mk2s. Layer height between 0.1 and 0.25mm, infill doesn't really matter
Assembly: Glue some small pieces of EVA foam (or anything else that is squishy and can grip the blade) inside of the two printed parts tto provide friction that holds the knife. Test if friction is high enough. Glue together two halves of pouch, pass a strap through the strap holding slot (designed for a 19mm wide and 1mm thick strap, but not yet tested)