Thingiverse
Tipi - Two trees sapphire
by Thingiverse
Last crawled date: 4 years, 2 months ago
Tipi - Top enclosure for 3d printer - Two trees sapphire ( Sapphire S3 Black - enclosure version )
Example was printed with ASA filament, using 1.0mm nozzle - for fast prototyping.
330X330 or bigger - recommended print surface!
Update:
01 11 2019 I complete the print, however the parts are barely fit on the print plate (TRONXY 330X330), and this facilitate that build up tension to ripoff the print surface from the support; therefore in order to avoid that...I strongly recommend to print direct on glass, or on a bigger print plate!
Unfortunately I do not have a bigger printer, or at least a glass 330X330... to test my theories, If anyone printing this and want to share the experience with the rest of us... please do not be shy!
29 10 2019 New design Tipi 5. I design a stronger base for the tipi, and I hope it will be able to "take" the build up pressure. Comes in two versions - 1 and 2mm.
I strongly recommend using a printer with an enclosure!
29 10 2019 Unfortunately the second trial fail also - Tipi 3. I ensure I have a good adhesion for the 1st layer, however the build up tension start to rip off (unglue) the printing surface (buildtak like) from the support.
29 10 2019 See first failure of the Tipi 2 print, a lot of tension due to the design, if I will not be able to print the part due to warping... part design will be modified!
However I think is just the poor quality of my print surface!
28 10 2019 Change base file
Strongly recommend using filament with a high melting point as ABS or ASA, since temperature can exceed 70 Celsius!
Main body have the Build Plate Adhesion - build inn - required to be removed after! Ensure the adhesion of first layer is good, recommend also using a BRIM.
Base part - require support!
Design to print without support... mostly :) by Costa
Example was printed with ASA filament, using 1.0mm nozzle - for fast prototyping.
330X330 or bigger - recommended print surface!
Update:
01 11 2019 I complete the print, however the parts are barely fit on the print plate (TRONXY 330X330), and this facilitate that build up tension to ripoff the print surface from the support; therefore in order to avoid that...I strongly recommend to print direct on glass, or on a bigger print plate!
Unfortunately I do not have a bigger printer, or at least a glass 330X330... to test my theories, If anyone printing this and want to share the experience with the rest of us... please do not be shy!
29 10 2019 New design Tipi 5. I design a stronger base for the tipi, and I hope it will be able to "take" the build up pressure. Comes in two versions - 1 and 2mm.
I strongly recommend using a printer with an enclosure!
29 10 2019 Unfortunately the second trial fail also - Tipi 3. I ensure I have a good adhesion for the 1st layer, however the build up tension start to rip off (unglue) the printing surface (buildtak like) from the support.
29 10 2019 See first failure of the Tipi 2 print, a lot of tension due to the design, if I will not be able to print the part due to warping... part design will be modified!
However I think is just the poor quality of my print surface!
28 10 2019 Change base file
Strongly recommend using filament with a high melting point as ABS or ASA, since temperature can exceed 70 Celsius!
Main body have the Build Plate Adhesion - build inn - required to be removed after! Ensure the adhesion of first layer is good, recommend also using a BRIM.
Base part - require support!
Design to print without support... mostly :) by Costa
Similar models
thingiverse
free
Ender 5 Display mount for V2 screen by Charleshu32
...apting ender 3 v2 screen to ender 5: https://www.reddit.com/r/ender5/comments/m0vbxr/ender_5_with_a_ender_3v2_screen_ender_5_v2/
thingiverse
free
ANET A8 - Y-axsis Tension Frame
...tted the frame to the printer and adjusted the gap for "plate" 0,1mm wider to make it more smooth. (y-tension-frame v4)
thingiverse
free
FireStick 4K Sleeve Revised by 8bitz
...off
tree supports = on (everywhere)
build plate adhesion = brim
scale = 98% (original print @ 95% had issues with layer adhesion)
thingiverse
free
Print Surface Adhesion Test by Enginwiz
...e
to compare the adhesion forces of different tapes, hair sprays, slurries and build plate materials i designed this test print.
thingiverse
free
Sunflower Measuring Cup by michaelasakitis
...dhesion plate for better support in the print. i created this print design on tinkercad and imported the stl file on thingiverse.
thingiverse
free
GoPro 45-Degree Attachment by GVGraphics
...leg / surface (screw etc.); or use a strong adhesive.
printed at 0.1; 10% infill; no support - but will work with other settings.
thingiverse
free
Customizable Keychain Display Stand
...ate adhesion brim to not fail at the short and the long part.
completely free to share and commercial use.
created by berke aksoy
thingiverse
free
A-10 Thunderbolt by atamerica
...tern : zigzag
support density : 15%
use tower (check)
build plate adhesion : none
back part : no need support.
infill : 100%
pla.
thingiverse
free
Two Trees Sapphire Plus enclosure by Slingermakes
...printer. the printed parts are all fairly simple, and i would probably design them differently if i did it again, but this works.
grabcad
free
Sapphire PLUS E3D V6 Hotend Mount
...eforme from the heat !
you will need just: 6 nut inserts, m3 screws, e3d v6 hotend, and the original parts of the printer hotend.
Tipi
design_connected
$13
Tipi
...tipi
designconnected
skargaarden tipi computer generated 3d model. designed by cyren, marten.
design_connected
$10
Tipi
...tipi
designconnected
adelta tipi computer generated 3d model. designed by aarnio, eero.
3ddd
$1
Tipi Small and Tipi Large by Skargaarden
...tipi small and tipi large by skargaarden
3ddd
skargaarden
http://skargaarden.com/products/tipi/
turbosquid
$5
Tipi
...uid
royalty free 3d model tipi for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1491486)
3ddd
free
Invicta tipi
... invicta , tipi , печь
turbosquid
$30
Tipi
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
tipi
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Многофункциональная модульная полка Tipi
...кциональная модульная полка tipi
3ddd
tipi , стеллаж
http://www.joynout.com/#!tipi/c1klo
3d_sky
free
Tipi Tipi Small and Large by Skargaarden
...tipi tipi small and large by skargaarden
3dsky
tipi large small lamp street
http://skargaarden.com/products/tipi/
3d_sky
free
Invicta tipi
...invicta tipi
3dsky
fireplace invicta tipi oven
Sapphire
turbosquid
$30
Sapphire
...alty free 3d model sapphire for download as obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1304434)
turbosquid
$9
Sapphire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
turbosquid
$35
Sapphire ring
...quid
royalty free 3d model sapphire ring for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1320838)
turbosquid
$22
Ring with sapphires
...royalty free 3d model ring with sapphires for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1375607)
turbosquid
$20
sapphire ring
...quid
royalty free 3d model sapphire ring for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1306560)
turbosquid
$3
Zora Sapphire
... free 3d model zora sapphire for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1613795)
turbosquid
$50
sapphire ring
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Sapphire ring
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Sapphire Lode
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Trees
3d_ocean
$9
tree
...tree
3docean
textured tree
textured tree
3d_ocean
$9
tree
...tree
3docean
textured tree
textured tree made with cinema4d
3d_ocean
$9
tree
...tree
3docean
cinema4d textured tree
textured tree made with cinema4d
3d_export
$10
tree
...tree
3dexport
this is a tree.
3d_export
$7
Tree
...tree
3dexport
tree
3d_export
$5
tree
...tree
3dexport
tree
3d_export
$5
Tree
...tree
3dexport
tree
3d_export
$5
Tree
...tree
3dexport
tree
3d_export
$5
Tree
...tree
3dexport
tree
3d_export
free
tree
...tree
3dexport
tree.
Two
turbosquid
$4
Two Axes Two States
...free 3d model two axes two states for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1468396)
3d_export
$5
s of two one and two
...blender file. one burner cooker: vertices: 16,221 faces: 14,780 triangle: 31,490 two burner stove: vertices: 25,200 faces: 23,625
turbosquid
$20
two
...osquid
royalty free 3d model two for download as 3ds and stl on turbosquid: 3d models for games, architecture, videos. (1435051)
3ddd
$1
avec two
...avec two
3ddd
jmm , avec two
jmm avec two
3ddd
$1
cea two
... вентилятор , потолочный
cea two
все размеры
vray+corona
3d_export
$5
Two speaker
...two speaker
3dexport
this is a 3d model of two speakers from sven
3d_export
free
Two wall
...two wall
3dexport
two wall<br>.blend
design_connected
$29
All-Two
...all-two
designconnected
bonaldo all-two computer generated 3d model. designed by bicego, sergio.
design_connected
$9
Two Timer
...two timer
designconnected
established & sons two timer computer generated 3d model. designed by industrial facility.
turbosquid
$21
DAVENTRY Two Over Two Chest of Drawers
... chest of drawers for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1684477)