Thingiverse
TinyJoypad compatible clamshell case
by Thingiverse
Last crawled date: 5 years, 5 months ago
This is a clamshell style case for the TinyJoypad gameconsole, focusing on minimal footprint and minimal number of parts.
Games and wiring instructions here: https://sites.google.com/view/arduino-collection/tiny-joypad?authuser=0
BOM:
Attiny85 DIP8 (one for each game)
DIP8 socket (if you plan to change games later)
1x 128x64 SSD1306 I2C OLED (0.96", 4pin)
4x 6mmx6mm silent tactswitches (through hole)
1x 12x12mm tact switch (through hole)
1x 9x3.6mm slide switch (if you want to be able to turn if off with battery in)
1x 10K resistor
2x 22K resistor
2x 33K resistor
2x 88K resistor
wires (old IDE HDD cable is ideal)
1x 30x3mm screw for the lid
my design does not use one, but you can add a piezzo-speaker for sound
Games and wiring instructions here: https://sites.google.com/view/arduino-collection/tiny-joypad?authuser=0
BOM:
Attiny85 DIP8 (one for each game)
DIP8 socket (if you plan to change games later)
1x 128x64 SSD1306 I2C OLED (0.96", 4pin)
4x 6mmx6mm silent tactswitches (through hole)
1x 12x12mm tact switch (through hole)
1x 9x3.6mm slide switch (if you want to be able to turn if off with battery in)
1x 10K resistor
2x 22K resistor
2x 33K resistor
2x 88K resistor
wires (old IDE HDD cable is ideal)
1x 30x3mm screw for the lid
my design does not use one, but you can add a piezzo-speaker for sound