Thingiverse
![Tiny Whoop Brushless by BdejaN](/previews/8771385.jpg)
Tiny Whoop Brushless by BdejaN
by Thingiverse
Last crawled date: 3 years, 1 month ago
Brushless Tiny Whoop
Duct for each motor printed as separate part, so if you break one you don't have to print entire frame.
Print each part twice and put everything together like this:https://www.youtube.com/watch?v=ICViKRukXuo
Designed for following parts:
Motors: Racerstar 1103 8000kv/10000kv
Propeller: DYS 2030
Flight controller: Pico BLX (20mm x 20mm mounting holes)
ESC: 4in1 racerstar 6A (20mm x 20mm)
Battery: 2s
Finished product should look like this:https://www.youtube.com/watch?v=j3msxzyWhr4
3d printed:https://www.youtube.com/watch?v=rPKuajP53lA
Added 3-inch version (77.5mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Added 40mm version (41mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Added 50mm version2 (48mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Added 3-inch full FC version (77.5mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
30x30mm FC mounting holes
Added 53mm version (53mm inner diameter)
Turns out that DYS 2030 propeller is 53mm in diameter (and not 47mm as stated on Banggood site). So new version was in order...
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Recommended props DYS 2030
RCgroups thread - https://www.rcgroups.com/forums/showthread.php?2815221-Snapy-brushless-Tiny-Whoop
Duct for each motor printed as separate part, so if you break one you don't have to print entire frame.
Print each part twice and put everything together like this:https://www.youtube.com/watch?v=ICViKRukXuo
Designed for following parts:
Motors: Racerstar 1103 8000kv/10000kv
Propeller: DYS 2030
Flight controller: Pico BLX (20mm x 20mm mounting holes)
ESC: 4in1 racerstar 6A (20mm x 20mm)
Battery: 2s
Finished product should look like this:https://www.youtube.com/watch?v=j3msxzyWhr4
3d printed:https://www.youtube.com/watch?v=rPKuajP53lA
Added 3-inch version (77.5mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Added 40mm version (41mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Added 50mm version2 (48mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Added 3-inch full FC version (77.5mm inner diameter)
Haven’t printed it yet so I don’t know if it is sturdy enough.
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
30x30mm FC mounting holes
Added 53mm version (53mm inner diameter)
Turns out that DYS 2030 propeller is 53mm in diameter (and not 47mm as stated on Banggood site). So new version was in order...
Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
Angled struts
Slots for motor wires. Braking duct doesn’t require disordering
Recommended props DYS 2030
RCgroups thread - https://www.rcgroups.com/forums/showthread.php?2815221-Snapy-brushless-Tiny-Whoop
Similar models
thingiverse
free
![Wheel with tire by fatbear666](/t/8272490.jpg)
Wheel with tire by fatbear666
...666
thingiverse
tire - tpu, 0.4mm nozzle, 0.2mm layer, 0.4mm wall tickness.
wheel - pla, 0.4mm nozzle, 0.2mm layer.
no supports.
thingiverse
free
![Nozzle Holder by MaczkanicsG](/t/8263057.jpg)
Nozzle Holder by MaczkanicsG
....4mm nozzle, 0.15mm layer height
3x 0.2mm nozzle
3x 0.3mm nozzle
2x3 0.4mm nozzle
3x 0.5mm nozzle
3x 0.6mm nozzle
3x 0.8mm nozzle
thingiverse
free
![Light 16g covid face shield no rubber by pietreksz](/t/5029471.jpg)
Light 16g covid face shield no rubber by pietreksz
...
0.4mm nozzle - 54m
files with 08mm in name are optimized for 0.8mm nozzle.
file with 04mm in name is optimized for 0.4mm nozzle.
thingiverse
free
![0.4mm MK8 Nozzle Cannister by MACParts](/t/8378771.jpg)
0.4mm MK8 Nozzle Cannister by MACParts
...mk8 nozzle cannister by macparts
thingiverse
this is a nozzle cannister i designed for holding my mk8 0.4mm & 0.8mm nozzles.
thingiverse
free
![Peace Bowl / Tray by FamousK](/t/8681615.jpg)
Peace Bowl / Tray by FamousK
...g with an 0.8mm or 0.4mm nozzle
printed on an anet a8 with an 0.8mm nozzle at 0.4mm layer, 3 bottomlayers, 0 toplayers, 2 shells.
thingiverse
free
![McQueen cookie by aussieman](/t/8736386.jpg)
McQueen cookie by aussieman
...se
shell thickness is 0.8mm, designed for 0.4mm nozzle diameter.
the pla is ideal filament for the things like a cookie cutters.
thingiverse
free
![Surgical Mask Strap for 0.8mm Nozzle Printers by makerjeff](/t/5054411.jpg)
Surgical Mask Strap for 0.8mm Nozzle Printers by makerjeff
... x/y corners have filets applied for smoother high speed prints.
thinner 2-layer main strap ( 0.8mm nozzle, 0.4mm layer height ).
thingiverse
free
![Wire spool by asmunderik](/t/8926351.jpg)
Wire spool by asmunderik
...k
thingiverse
a wire spool for your spare wires
dimensions:
inner diameter: 11.5mm
spool diameter: 20mm
wall diameter: 60mm
thingiverse
free
![8 March cookie by aussieman](/t/8736421.jpg)
8 March cookie by aussieman
...se
shell thickness is 0.8mm, designed for 0.4mm nozzle diameter.
the pla is ideal filament for the things like a cookie cutters.
grabcad
free
![4020 Outrunner Brushless Motor Stator](/t/1656775.jpg)
4020 Outrunner Brushless Motor Stator
...motor stator
grabcad
12 slot brushless motor stator with 40mm diameter and 20mm length. wound with 1,5mm copper wire, 6+6 turns.
Whoop
thingiverse
free
![whoop by MichaelJFPV](/t/8804696.jpg)
whoop by MichaelJFPV
...whoop by michaeljfpv
thingiverse
whoop
thingiverse
free
![Tiny Whoop holder for 2 whoops by d2000](/t/8282781.jpg)
Tiny Whoop holder for 2 whoops by d2000
...tiny whoop holder for 2 whoops by d2000
thingiverse
tiny whoop holder for 2 whoop mini drones and battery
thingiverse
free
![Whoop frame by Brassekongo](/t/8094365.jpg)
Whoop frame by Brassekongo
...whoop frame by brassekongo
thingiverse
a tiny whoop frame
thingiverse
free
![Whoop frame by Brassekongo](/t/8094419.jpg)
Whoop frame by Brassekongo
...whoop frame by brassekongo
thingiverse
my first whoop frame.
thingiverse
free
![WHOOPS 4](/t/4840902.jpg)
WHOOPS 4
...
whoops is another
big cinewhoop as addon for hyperlite tooth fairy race frame 4"
first flight https://youtu.be/xm9afwiiass
thingiverse
free
![Tiny Whoop 65mm by binaryfpv](/t/8233253.jpg)
Tiny Whoop 65mm by binaryfpv
...tiny whoop 65mm by binaryfpv
thingiverse
tiny whoop 65mm
thingiverse
free
![V-Tail Whoop by Mystereon](/t/8671269.jpg)
V-Tail Whoop by Mystereon
...v-tail whoop by mystereon
thingiverse
v-tail whoop .. wip
thingiverse
free
![Tiny Whoop Case by 3DRCStore](/t/8804148.jpg)
Tiny Whoop Case by 3DRCStore
...tiny whoop case by 3drcstore
thingiverse
tiny whoop case for transport.
thingiverse
free
![Tiny Whoop Calibration Base](/t/4693701.jpg)
Tiny Whoop Calibration Base
...tiny whoop calibration base
thingiverse
a base usefull to calibrate your tiny whoop
thingiverse
free
![Tiny Whoop Gate by Imozeb](/t/8262434.jpg)
Tiny Whoop Gate by Imozeb
...tiny whoop gate by imozeb
thingiverse
custom tiny whoop gate. requires hot glue for assembly.
Brushless
turbosquid
$4
![Brushless motor](/t/13420139.jpg)
Brushless motor
...r download as 3ds, dxf, obj, xsi, wrl, fbx, dwg, dae, and skp on turbosquid: 3d models for games, architecture, videos. (1366202)
3d_export
$10
![wheel and motor for mars rover](/t/11921592.jpg)
wheel and motor for mars rover
...last project: a mars rover concept. complete wheel and brushless electrical motor designed to attach to an atv or...
3d_export
$100
![the volt futuristic ev hypercar](/t/11417467.jpg)
the volt futuristic ev hypercar
...future ! some design aspects : this is in-wheel (brushless hub) motors vehicle, for each motor the core part...
3d_export
$20
![si cantik cargo plane for humanity medicine kit](/t/11463191.jpg)
si cantik cargo plane for humanity medicine kit
...used for the tailboom. the electronic components used are brushless motor os 1000kv which can produce thrust 3kgas a...
free3d
free
![N6375 Brushless Motor](/t/9702299.jpg)
N6375 Brushless Motor
...n6375 brushless motor
free3d
n6375 brushless motor
thingiverse
free
![Tyro 79 brushless key](/t/4904904.jpg)
Tyro 79 brushless key
...tyro 79 brushless key
thingiverse
tyro 79 brushless key
thingiverse
free
![Propeller antirotation brushless lock](/t/4788532.jpg)
Propeller antirotation brushless lock
...propeller antirotation brushless lock
thingiverse
propeller antirotation brushless lock
thingiverse
free
![Brushless motor holder by NukeCraft](/t/8550663.jpg)
Brushless motor holder by NukeCraft
...brushless motor holder by nukecraft
thingiverse
brushless motor holder for bl3650
thingiverse
free
![Brushless motor mount by robotbuilders](/t/8604629.jpg)
Brushless motor mount by robotbuilders
...brushless motor mount by robotbuilders
thingiverse
replacement mount for brushless motor.
thingiverse
free
![Brushless motor mount by TarsVH](/t/9043643.jpg)
Brushless motor mount by TarsVH
...brushless motor mount by tarsvh
thingiverse
a mount for a 2830 size brushless motor
Tiny
turbosquid
$3
![Tiny Mushroom](/t/13358923.jpg)
Tiny Mushroom
...squid
royalty free 3d model tiny mushroom for download as ma on turbosquid: 3d models for games, architecture, videos. (1562284)
turbosquid
$2
![Tiny Tank](/t/13336613.jpg)
Tiny Tank
...osquid
royalty free 3d model tiny tank for download as blend on turbosquid: 3d models for games, architecture, videos. (1542044)
turbosquid
$3
![Tiny Knife](/t/13315649.jpg)
Tiny Knife
...
royalty free 3d model tiny knife for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1358937)
3d_export
$5
![Tiny house](/t/11695906.jpg)
Tiny house
...tiny house
3dexport
https://www.dock4all.com/
3d_export
free
![Tiny Toy](/t/11387361.jpg)
Tiny Toy
...tiny toy
3dexport
turbosquid
$30
![Tiny Tank](/t/13341721.jpg)
Tiny Tank
...lty free 3d model tiny tank for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1608730)
turbosquid
$20
![Tiny houses](/t/13340595.jpg)
Tiny houses
...lty free 3d model tiny house for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1642651)
turbosquid
$100
![Tiny boy](/t/13398973.jpg)
Tiny boy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
![Tiny Man](/t/13251224.jpg)
Tiny Man
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
![Tiny House](/t/13247868.jpg)
Tiny House
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.