Thingiverse
Tile base by tomofdarkness
by Thingiverse
Last crawled date: 3 years, 5 months ago
Okay, final release. The v5 connector is nice and snug when you glue it to a piece of cardboard as the tile top. I can't wait to see what gets done with these, so please post your makes :)
Glue a cardboard (or 3d printed) tile on top. Connector is 1mm narrower all the way around, but a little more than full height for the spacing. 4mm x 1mm holes in connector and tile base for magnets which may or may not be necessary or useful.
These are oversized, 1.25" per "square" (4 squares per tile base) to make room for walls and such but still have room for 1" miniatures to fit in a square. You can scale down X and Y if you want to print 1" per square, but that will mean smaller magnets too. If the magnets are even useful...
Square tile, 1/2 rectangle, 1/2 triangle, rounded corner, and rounded dead end. Print at 0.25 layer height.
Credit for the idea goes to Michael over at http://project-saros.com
Glue a cardboard (or 3d printed) tile on top. Connector is 1mm narrower all the way around, but a little more than full height for the spacing. 4mm x 1mm holes in connector and tile base for magnets which may or may not be necessary or useful.
These are oversized, 1.25" per "square" (4 squares per tile base) to make room for walls and such but still have room for 1" miniatures to fit in a square. You can scale down X and Y if you want to print 1" per square, but that will mean smaller magnets too. If the magnets are even useful...
Square tile, 1/2 rectangle, 1/2 triangle, rounded corner, and rounded dead end. Print at 0.25 layer height.
Credit for the idea goes to Michael over at http://project-saros.com
Similar models
thingiverse
free
Soldering Iron Holder With Magnetic Base Stand by mb20music
...ust use some double-sided foam tape on the bottom of the base to secure it.
you will need to super glue the base to the holder.
thingiverse
free
Square to Round Conversion Base by glue
...
change a 20mm square into a 32mm round.
added a version that should fit a 1mm x 2mm magnet (haven't been able to test it)
thingiverse
free
Rainbird connectors for 1/2" ID hose by StafDehat
...3mm-wide skirt, 0 bottom layers, and 0 top layers. this is only half the connector, so print 2 and glue them together afterward.
thingiverse
free
Survive Escape from Atlantis - component boxes by glitch17
...glued them in and they are staying in. the tops of the boxes you will need to rotate 180 degrees to they print with the top down.
thingiverse
free
Openforge 2x2 Cut Stone Downward Stair Tile with Magnetic Openlock Base
...top
put the magnets in
glue the top on
i like using the medium-springy clips from here: https://www.thingiverse.com/thing:3367267
thingiverse
free
Voopoo DragX Pod Travelcase for 2 Pods by himsself
...larity ;-)
the magnets should be pressed into the print with pliers and held without glue, if not, just add a drop of super glue.
thingiverse
free
Hexagon key holder by awesomemakes
... "color change") on 1.8 mm so that you can insert the magnet.
don't want to print it yourself? you can buy it here!
thingiverse
free
OnePlus X Car holder by marcfischer
...the holder to the determined place.
the cover is simply connectable with the magnets.
cover redesigned, oneplus one will now fit.
thingiverse
free
25mm x 1mm Round Miniature Base with 5mm x 1mm Round Magnet Hole by JayKilleen
... base. a magnet can then be glued in.
i haven't actually printed/tested this yet so when i have i'll provide any changes.
thingiverse
free
Magnetic Dust Collector Adapter pre-made for 3/8" disc magnets
...pictures). i've also included a 4" to 2.5" version.
printed with pla on my prusa mk3 without any special settings.
Tomofdarkness
thingiverse
free
Waddles by tomofdarkness
...he set, waddles the pig! test print soon, then i'll mark this to reflect that
updated to be functional and use less plastic
thingiverse
free
Both Grunkle Stans by tomofdarkness
...y are here (in cura at least). scale them up to 150% (around 125-140mm on the largest dimension) for a cutter that prints great.
thingiverse
free
Affect rings for game tokens by tomofdarkness
...762488 -- print a bunch in different colors and you can use them to remind you who's blessed, baned, poisoned, entangled, etc
thingiverse
free
Mabel Cookie Cutter by tomofdarkness
...f the lines, and i probably need to print at 125%-ish nonetheless, but... yeah. i'll let you know when it's printable :)
thingiverse
free
Dipper Cookie Cutter by tomofdarkness
...f the lines, and i probably need to print at 125%-ish nonetheless, but... yeah. i'll let you know when it's printable :)
thingiverse
free
Soos cookie cutter by tomofdarkness
...small even at 133% on the xy. new version uploaded that should fix that and clean up the print, i'll try it when i get home.
thingiverse
free
Drama masks cookie cutter (and press) by tomofdarkness
...done, so i'm printing the border at 101%.
edit -- this prints great! at 101% for the border, the press fits nicely in there.
thingiverse
free
Burley Travoy cargo clip by tomofdarkness
...y and decrease the size of the openings so that it will cinch down without a) breaking or b) sliding right back out. iterations!
thingiverse
free
Generic marker tokens by tomofdarkness
... one is 6 and which one is 9!
added a set of 4 to be printed at 2x1y1z or 2x2y1z or basically any larger size for bigger monsters
Tile
archibase_planet
free
Tiles
...tiles
archibase planet
roof tiling tiled roof
tile fragment - 3d model for interior 3d visualization.
3d_export
$5
Tile
...tile
3dexport
tile in house
3d_export
free
tiles
...tiles
3dexport
design of tiles in different files
archibase_planet
free
Tiling
...tiling
archibase planet
roof tiling roofing
tiling n150708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tile
...rchibase planet
tiling roofing roof covering rooting material
tile roof n161011 - 3d model (*.3ds) for exterior 3d visualization.
3d_ocean
$2
Tiles
...he height, width, tile color, mortar color, mortar size, glossyness, roughness, flatness of the surface of the tiles are variable
3d_ocean
$2
Broken Tiles
...png poly texture tile tiling wow
tiling hand painted broken tile texture. comes with one flat 512×512 png file of tiling texture.
3d_ocean
$6
Decorative tiles
...h can be 3d printed also.i have added 3d printable format also (.stl),also there are 3 sizes available 12×12,14×14 ,16...
turbosquid
$9
Tiles
...royalty free 3d model tiles for download as max, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1552013)
3ddd
$1
плитка (tiled)
...плитка (tiled)
3ddd
плитка
плитка (tiled)
Base
archibase_planet
free
Base
...base
archibase planet
base column column base
base 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base ionic - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base tuscan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$18
Base
...base
designconnected
tom dixon base computer generated 3d model. designed by dixon, tom.