Thingiverse
Tiger's Head by Zirak
by Thingiverse
Last crawled date: 4 years, 7 months ago
Photos taken from Sony NEX 7 DSLR camera to stitch together a 3d object using Autodesk ReMake.
Will need supports to print the ears and the inner mouth.
Raft not required needed.
Recommended layer height 0.1mm
PLA/ABS works fine
Re-scale the object as needed
Will need supports to print the ears and the inner mouth.
Raft not required needed.
Recommended layer height 0.1mm
PLA/ABS works fine
Re-scale the object as needed