Thingiverse
Tig Primeweld slider control by Kisssys
by Thingiverse
Last crawled date: 2 years, 10 months ago
I've been playing with handheld tig current controls. This is my third version and I'm pleased with how it works. Uses inexpensive pots and switches and may be worth building for light welding use. It's made of PETG plastic so it can stand 130C I guess but if you're welding for long periods it may become soft. I've had no problems.
Potentiometer is from Sparkfun as is the knob.https://www.sparkfun.com/products/11620
https://www.sparkfun.com/products/14889
The switch is a 5mm high 6x6 pushbutton switch.
https://www.amazon.com/QTEATAK-Momentary-Tactile-Button-Switch/dp/B07VSNN9S2/ref=sr_1_3?dchild=1&keywords=6mm+push+button+switch&qid=1625175103&sr=8-3
I use this on a Primeweld 225 and the connector is available on ebay.https://www.ebay.com/itm/221726378880
The switch is only good for about 50ma so if you don't have a Primeweld then measure the current drawn through the pins that start the arc. The Primeweld is only about 10ma.
Low current is when pins 4 and 5 have a low resistance.
The unit fires when pins 1 and 2 are shorted.
Pins 6 to 7 need to be jumpered together.
I use a .75 inch double sided Velcro to attach to My CK torch. I just double over about 3/8 inch of Velcro and CA the end to keep it from pulling through. Makes it easy to slide around and rotate if you need to.
Their is a left and right hand version also.
Of course use it at your own risk, make sure the wiring is correct and compatible with your machine.
Cheers
Kisssys
Potentiometer is from Sparkfun as is the knob.https://www.sparkfun.com/products/11620
https://www.sparkfun.com/products/14889
The switch is a 5mm high 6x6 pushbutton switch.
https://www.amazon.com/QTEATAK-Momentary-Tactile-Button-Switch/dp/B07VSNN9S2/ref=sr_1_3?dchild=1&keywords=6mm+push+button+switch&qid=1625175103&sr=8-3
I use this on a Primeweld 225 and the connector is available on ebay.https://www.ebay.com/itm/221726378880
The switch is only good for about 50ma so if you don't have a Primeweld then measure the current drawn through the pins that start the arc. The Primeweld is only about 10ma.
Low current is when pins 4 and 5 have a low resistance.
The unit fires when pins 1 and 2 are shorted.
Pins 6 to 7 need to be jumpered together.
I use a .75 inch double sided Velcro to attach to My CK torch. I just double over about 3/8 inch of Velcro and CA the end to keep it from pulling through. Makes it easy to slide around and rotate if you need to.
Their is a left and right hand version also.
Of course use it at your own risk, make sure the wiring is correct and compatible with your machine.
Cheers
Kisssys
Similar models
thingiverse
free
Wireless Arduino Uno Xbee Shield Joystick Shield Controller by CWeb_The_Gingineer
... (xbee wifi module)https://www.sparkfun.com/products/12847 (xbee shield)https://www.sparkfun.com/products/10302 (tactile buttons)
thingiverse
free
4 6 and 8 button Macro pads by Jebidiah_Crumps
...ne wire per switch to a pin on the arduino.
to code it use the arduino ide and this guide https://www.sparkfun.com/tutorials/337
thingiverse
free
Schneider switch button (for double wall switches) by abbedabb
...s! needed a little polish on the two "pins" underneath. they need to be thin enough to slide into the switch mechanism.
thingiverse
free
Giant Button by MakeWorks
...ches wide. it makes a fun giant button on the top. i debossed a logo onto it for our purposes, but can be used for many purposes.
thingiverse
free
LED Panel 8 inch Picture Frame Corners by RobMiles
...e corners fit around the edges of the frame and you can secure them with a 3mm bolt so that your display is perfectly positioned.
grabcad
free
Smart foot/manual switch
...cm height. the size like ordinary switch.
warning! in safety reasons for hoigh voltage wires connection use sonoff usermonual.
3dwarehouse
free
RJM RG-16 Guitar Amp Channel Switcher
...latching and momentary switching * when using a 7-pin midi cable, the rg-16 provides phantom power to compatible midi controllers
thingiverse
free
Stepper Motor Speed Controller by dvanommen
...o push switches and a potentiometer for input! doesn't have to be for a stepper motor. whatever you use it for, please share!
thingiverse
free
Breville Grinder Single Dose by cloudonsky
... a marker to draw where to align the button )
insert pin a into the gap.
insert pin b to push pin a to trigger the safety switch.
thingiverse
free
TH8A Button Box Add-On by VostreRoy
...le_o05_s00?ie=utf8&psc=1
carbon fiber style vinyl wrap
if you have any question regarding this project, feel free to ask me.
Kisssys
thingiverse
free
Prusa Mk3 Dry Spool Holder by Kisssys
.../16" od, 1/8" widthhttps://www.amazon.com/213-buna-n-ring-durometer-black/dp/b000fmut86
have fun making.
cheers
kisssys
thingiverse
free
Polaris 180 Wheel Adapter to Ceramic 608 Bearings by Kisssys
...ers go between the bearings and give the screw something to tighten on, print 2 each.
cheers
kisssys
https://youtu.be/uxs9itpnjcg
thingiverse
free
JR module case by Kisssys
... for the amplifier i used. amp available on ebay.
probably a few hackers out their that can make use of the case.
cheers
kisssys
thingiverse
free
ImpulseRC Reverb GoPro HERO 9 Split Mount by Kisssy
...split mount by kisssy
thingiverse
impulserc reverb gopro hero 9 mount 25 degree
no nd
tbs glass nd filter
camerabutter
all ok!!
thingiverse
free
AutoEC Motor Model by Kisssys
...le is here. https://a360.co/39yonzy
this is uploaded to aid in the design of projects that make use of this motor.
cheers
kisssys
thingiverse
free
Part Trays by Kisssys
... them. i thought about printing a lid but i like to be able to see what's in the bin.
prints without support.
cheers
kisssys
thingiverse
free
2.4 ghz 12 element Yagi Quick build by Kisssys
...ess that 10 minutes and increases my range 2 to 3 times. i've measured a real world gain of 10 to 11 db.
enjoy
kisssys
w5slw
thingiverse
free
Lathe RPM meter by Kisssys
...ut 3mm clearance.
i see a lot of downloads of my lathe attachments so i hope you all can make use of this as well.
cheers
kisssys
thingiverse
free
Basket for Harbor Freight Ultrasonic Cleaner by Kisssys
...port when printing.
not sure if the height effects how the ultrasonic cleaner works but i think it will work fine.
cheers
kisssys
thingiverse
free
3d Filament Moisture monitor by Kisssys
...olutions-5-gallon-paint-bucket/3734787
bucket lidhttps://www.lowes.com/pd/encore-plastics-12-in-white-plastic-bucket-lid/50094688
Tig
3d_ocean
$16
MIG Welder Fantasy
...heat industrial machine mag mig mma oxygen repair steel tig tool weld welding wire high detailed 3d model of...
cg_studio
$19
MIG Welder Fantasy3d model
...electric steel aluminium alloy electrode wire coated repair mig tig mag mma machine device garage industrial tool heat gas...
3d_export
$20
MIG Welder Fantasy 3D Model
...electric steel aluminium alloy electrode wire coated repair mig tig mag mma machine device garage industrial tool mig welder...
thingiverse
free
TIG grinder uses collet by jobstulus
... dremel and let the electrode gently touch the rotating disc while turning the electrode slowly.
there you are. sharp electrodes.
thingiverse
free
Tig Filler Rod Caddy by DirtyWhiteBoy
...tig filler rod caddy by dirtywhiteboy
thingiverse
caddy for filler rod to mount on welding cart
thingiverse
free
Open-Source Touchless Hand Sanitizer by torrefic
...about their vision and mission, visit their website at https://www.tigeb.org/about/ further development is highly encouraged to help make this...
thingiverse
free
Stuhl-Reparatur by JoHuVo
...nach erneutem verkleben zusätzlich diese ecken eingeschraubt. hält jetzt 100%tig lochdurchmesser: 4mm drucker: anet am8 material: petg nozzle: 0,5mm...
thingiverse
free
TIG Tungsten Grinder - HF Tool Grinder by Slow_Polk
...rpener-99823.html
brass inserts: https://www.amazon.com/gp/product/b082r4brgc/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Abrazadera porta bidones by airshark
...eje de la abrazadera es de varilla de soldar tig de 1,6 mm de diámetro también de acero...
thingiverse
free
TIG Welding Tray by axlejor
....
i used the default settings on my prusa mk3 and used support material on the build tray only.
i hope it works for you!
alex
Slider
3ddd
$1
La Fabbrica THRILL FROST, ALPS
..._____________________________________ 3dsmax 2014, 2011. fbx 2014, 2013, 2011, obj _____________________________________http://www.lafabbrica.it/ru/collections/thrill-12#slider10 ...
3d_ocean
$15
Rayban Aviator Sunglasses
...model of the rayban aviator sunglasses, with an xpresso slider for controlling the temple’s opening and closing . formats:...
3d_ocean
$9
audio CD + case
...& texture hd highly detailled animated case with xpresso slider (animation: rotation couvercle) all textures (cd label & cover...
3d_ocean
$12
Bolt Cutter (Xpresso Slider Controlled)
...are to use slider controller. you can see how to use slider in preview video. render system and materials are ready. c4d and o...
3d_ocean
$25
Sunflower (rigged)
...model full rigged (just move one dummy and 3 slider to...
3d_ocean
$12
led desk Lamp
...led desk lamp (rigged ) easy to animate by slider …i made it with xpresso system in c4d...
3d_ocean
$9
compact disc + jewel case
...compact disc + jewel case animated case with xpresso slider (animation: rotation couvercle) all textures (cd label & cover...
3d_ocean
$45
UH1 -Huey Extreme
...helicopter high poly model huey military rigged model rockets slider textures uh-1d vehicle war the uh-1d huey helicopter as...
3d_ocean
$14
AMT Hardballer Handgun
...is split in three parts, the gun structure, the slider and the magazine. this makes the model...
3d_ocean
$9
Seats with Automatic Adding Slider (Xpresso)
... / images and read description carefully before you buy. thanks. you need cinema 4d software to use slider controller or just ...
Control
3d_export
$95
Starship Bridge Command Center 3D Model
...3d model 3dexport interior spaceship command center bridge panel control console future futuristic captain starship bridge command center 3d...
3d_export
$20
Racing Track Toy 3D Model
...3d model 3dexport racing track cars road black yellow control racing track toy racing track toy 3d model cgaxis...
3d_export
$49
PS Vita 3D Model
...model 3dexport ps vita playstation portable game console motion controler psp gaming electronics game ps vita 3d model swan3dstudios...
3d_ocean
$69
T-34/85 Interior/Engine Bay Full Winter Camo
...and engine bay. the model contains a highly detailed interior(control, gauges, machine gun, ammo, radio, main gun)...
3d_ocean
$99
T34/76 Tank with Interior HDRI
...highly detailed interior. the model contains a highly detailed interior(control, gauges, machine gun, ammo, radio, main gun). the model...
3d_ocean
$99
T-34-85 with Interior Winter Camo
...detailed interior . the model contains a highly detailed interior(control, gauges, machine gun, ammo, radio, main gun) fully modeled...
3d_ocean
$5
Retro Joystick
...retro joystick 3docean amiga caricature cartoon computer console controler game gaming joystick old play polygon red retro screen...
3d_ocean
$99
T34/76 with Interior Camo 3D Model
...highly detailed interior. the model contains a highly detailed interior(control, gauges, machine gun, ammo, radio, main gun). the model...
3d_ocean
$99
T-34/76 Interior/Engine Bay Full HDRI
...and engine bay. the model contains a highly detailed interior(control, gauges, machine gun, ammo, radio, main gun)...
3ddd
$1
IinfraredRooms_Helo_HSI20
...equipped with valance spot lighting, digital interior and exterior control, built in sound system with radio and cd player,...