Thingiverse
Tiered Tool/Brush Holder With Dovetails
by Thingiverse
Last crawled date: 5 years, 7 months ago
Girlfriend wanted a better organizer for her clay tools, so I threw this together.
3 main hole sizes are 18mm, 11mm, and 9mm. Plus 4 extra 2.8mm round holes, just to make use of the space left over.
3 different partitions (left/middle/right) with 31.5mm dovetails so you can connect any number of them together as your tool collection grows. I have not printed the right side, but I did include it.
3 tiers/steps for better viewing of tools. Larger holes being the tallest, smallest holes are the shortest.
I used 3 inch long 0.5 inch diameter wooden dowels to connect the racks to their bases, a little bit of sanding was needed. I have included a 12mm rod model to use, as well. I have not tested the fit of the plastic rod, so it may need adjustment. The rod will definitely need more infill than the rest.
3 main hole sizes are 18mm, 11mm, and 9mm. Plus 4 extra 2.8mm round holes, just to make use of the space left over.
3 different partitions (left/middle/right) with 31.5mm dovetails so you can connect any number of them together as your tool collection grows. I have not printed the right side, but I did include it.
3 tiers/steps for better viewing of tools. Larger holes being the tallest, smallest holes are the shortest.
I used 3 inch long 0.5 inch diameter wooden dowels to connect the racks to their bases, a little bit of sanding was needed. I have included a 12mm rod model to use, as well. I have not tested the fit of the plastic rod, so it may need adjustment. The rod will definitely need more infill than the rest.