Thingiverse
Tie Fighter Drone Landing Struts by JeBear76
by Thingiverse
Last crawled date: 4 years, 5 months ago
Here are landing struts for StarWars TieFighter Gen2
If like me, you're not the most skilled at landing, this will save you reprints of the bottom wings.
I used 10mmx8mm x1m of carbon fibre tube to make the legs.
4x 170mm for the diagonal bars
2x +-160mm for the horizontal bars
You'll also need 4 M3 bolts and nuts.
If like me, you're not the most skilled at landing, this will save you reprints of the bottom wings.
I used 10mmx8mm x1m of carbon fibre tube to make the legs.
4x 170mm for the diagonal bars
2x +-160mm for the horizontal bars
You'll also need 4 M3 bolts and nuts.