Thingiverse
Ti CC2531 Zigbee USB Stick Case with rounded edges by TTDARK
by Thingiverse
Last crawled date: 4 years, 11 months ago
Tested with PLA 200°C
Both sides should click together and hold by friction without gluing.
Some light sanding will be required for the rouded edges.
Disclaimer: Not tested for safety of the electronics. This includes but is not limited to: thermal, performance, signal strength etc. Use it at your own risk.
Both sides should click together and hold by friction without gluing.
Some light sanding will be required for the rouded edges.
Disclaimer: Not tested for safety of the electronics. This includes but is not limited to: thermal, performance, signal strength etc. Use it at your own risk.