Thrustmaster T300 Wheel Knob Clamps (remixed FULspeed) by philcotigo

Last crawled date: 3 years, 1 month ago

Knob attachment for Thrustmaster T300 RS Wheel.
Both of the front and back clamp components were modified to fit the wheel diameter and the egg like profile of the T300 steering wheel. As I haven't changed the original knob, you only find both clamping parts to download. Use the knob of your liking from the original "Steering wheel knob by FULspeed"
NOTE THAT since the T300 Wheel is rather small in diameter compared to an actual car wheel, I placed the knob on the outside. The T300 wheels diameter is compensated for in the design, so THERE IS ONLY ONE WAY OF MOUNTING THE CLAMP with this design.
For mounting the clamp you should deburr the edges of your print (for example in case of elephant foot) as otherwise you could damage your precious wheel. You can also put a matching rectangle of cloth between clamp and wheel if you like.
For print settings you can experiment with rafts in case you run into problems with the elephant foot.