Thingiverse
Thrustmaster Cougar MFD for 8 inch 800x480 screen by TriggerBMS
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is specifically for The 8 Inch LCD Display 800x480 for Raspberry Pi Display LCD Panel and the Thrustmaster Cougar MFD frame set!!!
The MFD can be mounted horizontal or vertical and there are mounting holes for the Cougar MFDs that match either option.
Due to manufacturing inconsistencies, I opted to mount the control board to the back of the screen with hot glue or double sided tape . I also significantly increased the size of the IO port hole. This should eliminate the issue of the power leads not being long enough or the hole not matching your specific board.
Hardware required:
The 8 Inch LCD Display 800x480 for Raspberry Pi
Thrustmaster Cougar MFD set
2-4 M2x4 screws
4 M4x6 screws
3 M3X12 screws
2-4 M3x16 screws
5 M3 Pressnuts
4 M4 press Nuts
4 M4 screws (Length determined by application of VESA Mounting)
Washers/spacers for M4 screws (VESA Mounting)
Double sided Tape
Assembly instructions are pretty much the same as here https://www.thingiverse.com/thing:3877146 hit me up with any questions
The MFD can be mounted horizontal or vertical and there are mounting holes for the Cougar MFDs that match either option.
Due to manufacturing inconsistencies, I opted to mount the control board to the back of the screen with hot glue or double sided tape . I also significantly increased the size of the IO port hole. This should eliminate the issue of the power leads not being long enough or the hole not matching your specific board.
Hardware required:
The 8 Inch LCD Display 800x480 for Raspberry Pi
Thrustmaster Cougar MFD set
2-4 M2x4 screws
4 M4x6 screws
3 M3X12 screws
2-4 M3x16 screws
5 M3 Pressnuts
4 M4 press Nuts
4 M4 screws (Length determined by application of VESA Mounting)
Washers/spacers for M4 screws (VESA Mounting)
Double sided Tape
Assembly instructions are pretty much the same as here https://www.thingiverse.com/thing:3877146 hit me up with any questions