Thingiverse
Throw lever for 44.5mm dial / vortex strike eagle 1x8
by Thingiverse
Last crawled date: 5 years, 3 months ago
This is my first thing I have made in Fusion 360 so be gentle.
I kept going through all the throw levers and wasn't getting a fit that I wanted or I would have to use some hardware like bolts and nuts. So I made this throw lever that all you should have to do is use a small plastic hammer to tap it on and in to place. Printed in abs at 100% infill (cubic) NO SUPPORTS. Supports did weird things to my print. This lever worked for my Vortex Viper PST Gen1 6x24 by 50 and my Vortex Strike Eagle 1x8 it may work on others as long as it have a 44.5mm zoom dial. If this breaks or gives you problems let me know so I can see whats going on but so far so good for me.
I kept going through all the throw levers and wasn't getting a fit that I wanted or I would have to use some hardware like bolts and nuts. So I made this throw lever that all you should have to do is use a small plastic hammer to tap it on and in to place. Printed in abs at 100% infill (cubic) NO SUPPORTS. Supports did weird things to my print. This lever worked for my Vortex Viper PST Gen1 6x24 by 50 and my Vortex Strike Eagle 1x8 it may work on others as long as it have a 44.5mm zoom dial. If this breaks or gives you problems let me know so I can see whats going on but so far so good for me.