Things or task reminder with sliders

Last crawled date: 4 years, 2 months ago

The thing:
This is my take on making a thing that reminds me on doing some tasks.
It serves me doing the preflight check before leaving the house.
Obviously inspired by existing reminders, but they were fixed on pills or feeding the dog or watering the plants.
I want it more flexibel, universal as I do with most of my creations.
Put on the stickers with marking or the written paper with glue here.
Feed the inserts for the items into the channels.
The bottomplate underneeth the sliders could be coloured by drawing with a permanent marker. Put some paint or colored foil in here.
It is up to you.
Edit your own thing using Tinkercad:https://www.tinkercad.com/things/1xEBdvPVG1M
Update:
How to make:
Needed parts
1 x the base part
1 x the top cover part
6 x slider (status)
6 x items slider with handle
At least 4 crews 3mm x 10mm for plastic (no machine screws please)
screw heads on top of the surface!
For reinforcing the build additional screws could be put along the long edges
Probably I will update the design, but it has no priority
If YOUR printed parts do not bow, do not worry.
If you trust glue, give it a try.
But moving the inserts in and out frequently might put much stress on the glue.
It might break then.
.
Have printed the body parts using the delivered white soft PLA filament (Sovol).
It prints out ok. It can be processed with a knife if it were ABS.
Huh. How can this be?
So my reminder parts have bowed much since removing them from the print bed.
Unfortunaly the items inserts do not make a frictional fit in this case.
Fixed with a bunch of screws and pins.
.
I would like making the sliders from two colors.
i.e. make the slider base from green filament, the knob from black or white or silver filament.
If not posssible print the sliders out from green filament.
Give the knob the black paint afterwards.
Parts:
-reminder base
-reminder top
-reminder slider (ON/Off, Red/Green,...)
-items slider (holding the things/task entries)
Take note:
Items insert slider thing 18.1mm wide is a little over intentionally (trimm it to the width it fits the channel tightly)