Thingiverse
Thin Wall Tester by MakerUnit
by Thingiverse
Last crawled date: 5 years, 2 months ago
Hi everybody,
I made a thin wall stress test that ranges from 2 mm to 0.4 mm. This will test the accuracy of your printer when printing thin walls.
Instructions:
Print the file with the recommend print settings.
Remove the test from the build plate carefully.
Measure the widths of the rings.
Compare the measurements.
I made a thin wall stress test that ranges from 2 mm to 0.4 mm. This will test the accuracy of your printer when printing thin walls.
Instructions:
Print the file with the recommend print settings.
Remove the test from the build plate carefully.
Measure the widths of the rings.
Compare the measurements.