Thingiverse
Thicker Catan frame border for thicker hex pieces by OpticalNecessity
by Thingiverse
Last crawled date: 4 years, 2 months ago
I had printed out shocksofmighty "Catan terrain tiles, modified for cylindrical magnets" file: https://www.thingiverse.com/thing:1991496 and wound up not wanting to deal with the work to make sure I had magnets facing the right directions. So I took Jornd's water file (border-v2.STL) and made the base thicker to match the thickness of my hex pieces.
NOTE: You will probably need to clean up the joint pieces with an exacto knife to make the pieces slide together a bit easier. The more you use it, the easier the pieces slide together. To avoid this you can print at 0.1mm layer height, or lightly sand the connector joints after printing.
For the base game, you will need:
6x: Catan_Water_Boarder.stl
For Seafarers, you will need:
2 x border-withHex-tall.stl
2 x border-extShort-tall.stl
2 x border-extLong-tall.stl
(As well, you'll need to print 7x Sea hexes and 1 x harbor-generic.stl)
Update: Increased the thickness of the Seafarers water boarders: border-plusHex.stl, border-extShort.stl, and border-extLong.stl. Named the modified tiles with a "-tall" suffix.
Seafarers expansion)
NOTE: You will probably need to clean up the joint pieces with an exacto knife to make the pieces slide together a bit easier. The more you use it, the easier the pieces slide together. To avoid this you can print at 0.1mm layer height, or lightly sand the connector joints after printing.
For the base game, you will need:
6x: Catan_Water_Boarder.stl
For Seafarers, you will need:
2 x border-withHex-tall.stl
2 x border-extShort-tall.stl
2 x border-extLong-tall.stl
(As well, you'll need to print 7x Sea hexes and 1 x harbor-generic.stl)
Update: Increased the thickness of the Seafarers water boarders: border-plusHex.stl, border-extShort.stl, and border-extLong.stl. Named the modified tiles with a "-tall" suffix.
Seafarers expansion)