Thingiverse
Thermaltake V21 shortened case feet for Ikea Kallax / Expedit by diarx
by Thingiverse
Last crawled date: 4 years, 3 months ago
A simple shortened case foot design to let the Thermaltake V21 fit inside an Ikea Kallax or Expedit shelving unit.
There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching. The feet should click in with a very firm push depending on your printer scale calibration (my own printer is close to scale but ever so slightly under).
Printed these in PLA rough on my printers fastest setting, 35% infill, since they aren't really visible when the case is sitting in the unit.
There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching. The feet should click in with a very firm push depending on your printer scale calibration (my own printer is close to scale but ever so slightly under).
Printed these in PLA rough on my printers fastest setting, 35% infill, since they aren't really visible when the case is sitting in the unit.