The Rim Job (margarita salter) by IVIUPPET

Last crawled date: 3 years ago

So you're at a party and the ladies want some margaritas. So you pull the 3D printer out of your ass and impress them with your tool and create a mini margarita assembly line. Now you don't even have to reach in there with your fingers smearing the wetness around to get things going, you just place the rim of the glass in the left side filled with margarita mix, with a followup on the right, resulting in the most perfect salted margarita glass ever seen.
Cleanup is easy, just throw it in the dishwasher!
See below for tutorial, download and impress today!!!!!
Disclaimer: I have heard it is bad to use 3D printed stuff on food. This is not recommended for use on food/beverages etc deemed for human consumption due to the wide variances in print nozzle and filament compositions. Unless you have a mass spectometer and can verify your printed copy of this Thing is not carcinogenic or in other ways toxic, do not use for anything you would put in your body. Especially if you live in California, where almost anything can give you cancer thanks to proposition 65.
I covered in acetone to melt the plastic and destroy anything on the surface, then put, what should be a sealed body in the dishwasher. This has not been tested by any healthcare professional or regulatory agency. Proceed at your own risk like anything else you saw on the internet.