Thingiverse
The pico Dugout for Dynavap by bearpants
by Thingiverse
Last crawled date: 4 years, 8 months ago
I could not remix this design officially I did not see a button but this is a smaller version. Posting what the OP wrote below.
thing:2634712
A Dugout for the Dynavap with a slide top and extra space for a quad torch/lighter/whatever else.
I love the Dynastash, but not the twisty top which came loose over time for me. This dugout is designed so that a magnet on the top is optional, but I do recommend them as the slide will come loose as well over time.
This is currently made to hold the Stinger Quad Torch Lighter by Vertigo which is available over at Dynavap's website: https://www.dynavap.com/dynashop/accessories/quad-torch-lighter
The lighter's dimensions from the site show: 8.2cm x 3.5cm x 1.9cm
To fit, I measured with some calipers and made the lighter hole this size:
X,Y,Z (X)40mm x (Y)20mm x (Z)88mm
***Important, if you want your Dynavap to center in the magnet like the OG Dynastash, you will need to purchase a DIAMETRICALLY aligned magnet for the middle. If you do not specifically look for this you might end up with a magnet that is AXIALLY aligned by mistake and the Dynavap will not stick in the middle of your disc magnet. Trust me, I know this, I made this mistake.
***You can also just order the magnet provided by Dynavap in their website, but as I designed this with a thicker magnet disc, the one from Dynavap will look pushed in, I might design another case so that it looks almost flush and works with the magnet from Dynavap.
Disc Magnets needed:
2x Neodymium Magnets 1/4 x 1/16 (6mm x 1.5mm)https://www.ebay.com/itm/50-Strong-Rare-Earth-Neodymium-Disc-Magnets-1-4-x-1-16-inch-New/261420345696?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
1x Diametric Neodymium Magnet 1/2 x 1/8 (13mm x 3mm)https://www.ebay.com/itm/20-Neodymium-Magnets-1-2-x-1-8-inch-Disc-DIAMETRIC-N48/400076765754?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
thing:2634712
A Dugout for the Dynavap with a slide top and extra space for a quad torch/lighter/whatever else.
I love the Dynastash, but not the twisty top which came loose over time for me. This dugout is designed so that a magnet on the top is optional, but I do recommend them as the slide will come loose as well over time.
This is currently made to hold the Stinger Quad Torch Lighter by Vertigo which is available over at Dynavap's website: https://www.dynavap.com/dynashop/accessories/quad-torch-lighter
The lighter's dimensions from the site show: 8.2cm x 3.5cm x 1.9cm
To fit, I measured with some calipers and made the lighter hole this size:
X,Y,Z (X)40mm x (Y)20mm x (Z)88mm
***Important, if you want your Dynavap to center in the magnet like the OG Dynastash, you will need to purchase a DIAMETRICALLY aligned magnet for the middle. If you do not specifically look for this you might end up with a magnet that is AXIALLY aligned by mistake and the Dynavap will not stick in the middle of your disc magnet. Trust me, I know this, I made this mistake.
***You can also just order the magnet provided by Dynavap in their website, but as I designed this with a thicker magnet disc, the one from Dynavap will look pushed in, I might design another case so that it looks almost flush and works with the magnet from Dynavap.
Disc Magnets needed:
2x Neodymium Magnets 1/4 x 1/16 (6mm x 1.5mm)https://www.ebay.com/itm/50-Strong-Rare-Earth-Neodymium-Disc-Magnets-1-4-x-1-16-inch-New/261420345696?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
1x Diametric Neodymium Magnet 1/2 x 1/8 (13mm x 3mm)https://www.ebay.com/itm/20-Neodymium-Magnets-1-2-x-1-8-inch-Disc-DIAMETRIC-N48/400076765754?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649