The Orbiter V1.5 direct dual drive Extruder FYSETC by FYSETC_Ltd

Last crawled date: 3 years, 2 months ago

Applicable machine model: Ender3, Ender3S, Ender3 pro, Ender3 V2, Ender5.
Need to change the motor wire terminal machine models by yourself: CR10, CR10 S4, CR10 S5, VORON and other models, as long as there is a mounting bracket for this extruder, you can use any step value that can be changed.
Precautions:
1) The drive current of the extruder needs to be adjusted to 0.35A (Method: adjust the voltage to about 0.28-0.3V or adjust the E-axis drive current by firmware)
Adjust the current reason: prevent the motor from overheating
2) Modify the extruder pulse method
Method 1: Firmware modify extruder pulse:
define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 665}
Method 2: Send G code (can be sent by slicing software command):
M92 E665
M500