The Kellybow - A Modern Nerf Rainbow Pistol by ahalekelly

Last crawled date: 3 years, 5 months ago

A modern reinterpretation of the classic rainbow pistol, designed to dominate high fps pistol rounds. Break action front end is based on Meaker's Mk18 pistol, and accepts Sledgefire and Spring Thunder shells. All stls are oriented in the right print orientation.
Hardware:
1.5" OD x 1.38" ID plunger tube. Aluminum recommended, polycarbonate might work but has not been tested
AR grip
3/8" square plunger rod with catch notch
2 #123 O rings (same as caliburn)
Gasketing foam for the break action
Plunger padding and/or a #208 O ring
Pen spring for catch
Elastic cord for latch
4 front plunger tube screws: 8-32 x 3/8"
4 rear plunger tube screws: 8-32 x 1/4"
Plunger head screw, 8-32 x ~1"
Latch pivot screw: 6-32 x 5/8"
Hinge screw: 8-32 x 1.5" & locknut
Trigger pivot screw: 4-40 x 3/8"
Grip screw: 10-32 x 1" & nut
2 rear cap screws: M3 x 20mm & nuts